Chamber Specifications

Entry & Mainlock Specifications

  • Vessel Type: Twin-Lock Cylinder with 2:1 Elliptical Heads
  • Maximum Working Pressure: 30 ATA (445 psi)
  • Minimum Working Pressure: 0.011 ATA (0.159 psi)
  • Code Stamped by: ANSI/ASME PVHO-1
  • Overall Length: 7.3m Approximate (24’)
  • Overall Height: 2.2m Approximate (7.3’)
  • Overall Width: 3.86m Approximate (12.6’)
  • Internal Length: 7m Approximate (23’)
  • Inside Diameter: 1.98m Approximate (6’5”)
  • Internal Volume: ML: 13.8 cubic meters (487.4 cu ft.)
  • EL: 7.23 cubic meters (255.6 cu ft.)
  • Outer Hull Man-ways: 76.2cm (30”) Clear Diameter Reinforcing Ring
  • Wet Pot Man-way: 76.2cm (30”) Clear Diameter Reinforcing Ring
  • Bunks: 4 X 1.88m (74”) Length, 0.6m (23.5”) Wide

Wet Pot Specifications

  • Maximum Working Pressure: 30 ATA
  • Minimum Working Pressure: 0.011 ATA (0.159 psi)
  • Code Stamped by: ANSI/ASME PVHO-1
  • Overall Height: 2.6m Approximate (104”)
  • Overall Width: 2.18m Approximate (86”)
  • Inside Diameter: 1.98m Approximate (78.25”)
  • Internal Volume: 9.59 cubic meters Approximate (339 cu ft.)
  • Mating Trunk: 76.2cm (30”) Inside Diameter