Siamak Arzanpour

Associate Professor of Mechatronic Systems Engineering

Simon Fraser University

sfu logo  

Journals:

  1. Khameneifar, F., Arzanpour, S, Moallem, M.,  2012, “Modeling and Analysis of a Piezoelectric Energy Scavenger for Rotary Motion Applications”, IEEE Transactions on Mechatronics TMECH-06-2011-1725
  2. Hoseini, M., Arzanpour, S., Golnaraghi, F., Parameswaran, A.M., 2011 “Solenoid actuator design and modeling with application in engine vibration isolators”, J. of Vibration and Control
  3. Asadi, E., Hoyle, A., Arzanpour, 2011, “Design of a Magnetorheological Damper Based Haptic Interface for Rehabilitation Applications”, Journal of Intelligent Material Systems and Structures, 22(11), pp. 1269-1277
  4. Mansour, H., Arzanpour, S., Golnaraghi, F., Parameswaran, A.M., 2011, “Semi-active engine mount design using auxiliary magnetorheological fluid compliance chamber”, Vehicle Systems Dynamics,  49( 3), pp. 449 - 462
  5. Mansour, H., Arzanpour, S., Golnaraghi, F., 2011, “Active decoupler design for hydraulic engine mount with application in variable displacement engines”, 17(10): pp. 1498-1508.
  6. Mansour, H., Arzanpour, S., Golnaraghi, F., 2010, “Design of a Solenoid Valve Based Active Engine Mount”, Journal of Vibration and Control, JVC-10-0195 (in press)
  7. Zakeri, V., Arzanpour, S., 2010, “Measurement and Analysis of Dental Handpiece Vibration for Real-Time Discrimination of Tooth Layers”, Journal of Selected Areas in Bioengineering (JSAB), 01(01), 13-18.
  8. Khameneifar, F., Moallem, M., Arzanpour, S, 2010, “Modeling and Analysis of a Piezoelectric Energy Scavenger for Rotary Motion Applications”, Journal of Vibrations and Acoustics, Volume 133,  Issue 1, 011005 (6 pages)
  9. Hoyle, A., Arzanpour, S., Shen, Y., 2010, “A Novel Magnetorheological Damper Based Parallel Planar Manipulator Design”, Journal of Smart Materials and Structures, 19, 055028 (9pp)
  10. Arzanpour, S., Golnaraghi, M.F., 2009, “Development of an Active Compliance Chamber to Enhance Performance of Hydraulic Bushings”, Journal of Vibration and Acoustics, Volume 132,  Issue 4, (7pp).
  11. Arzanpour, S., Golnaraghi, M.F., 2008, “Development of a bushing with an active compliance chamber for variable displacement engines”, Vehicle Systems Dynamics, Volume. 46, Issue 10, pp. 867 - 887.
  12. Arzanpour, S., Golnaraghi, M.F., 2008, “A Novel Semi-active Magnetorheological Bushing Design for Variable Displacement Engines”, Journal of Intelligent Material Systems and Structures, v. 19(9), pp. 989-1003.
  13. Arzanpour, S., Fung, J., Mills, J.K., Cleghorn, W.L., 2006, “Flexible fixture design with applications to assembly of sheet metal automotive body parts”, Assembly Automation, Volume 26, pp. 143-153.

Conferances:

  1. Arjmand, E., Arzanpour, S., Robinovitch S., 2012, “Mathematical Modeling of Inflatable Hip Protectors”, Canadian Society of Biomechanics/Societe Canadienne de Biomechanique, June 6-9, CSB/SBC 80.
  2. Arjmand, E., Arzanpour, S., Robinovitch S., 2012, “Mathematical Effectiveness of Inflatable Hip Protectors”, Canadian Society of Biomechanics/Société Canadienne de Bioméchanique, June 6-9, CSB/SBC 78.
  3. Zakeri, V., Arzanpour, S., 2012, “A Speed Regulating Scheme for Air-Turbine Dental Handpieces” American Control Conference, Montreal, Canada.
  4. Asadi, E., Arzanpour, S., 2011, “Digital Resistance-Map Generation for a Magnetorheological Damper Based Platfrom for Rehabilitation Applications”, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2011-4952.
  5. Harirforoush, R., Arzanpour, S., 2011, “A Numerical Approach of Estimating Dental Implant Healing Process Unisng Resonanace Frequency Analysis”, IMECE 2011-64415.
  6. Hekmati, A., Arzanpour, S., 2011,”A Mathematical Model of a Modified Voice Coil Energy Harvester” IMECE2011-64354.
  7. Mohareri O., Arzanpour, S., 2010, “Energy Harvesting and Vibration Control of a Hydraulic Engine Mount Using a Turbine,” IEEE Int. Conf. on Mechatronics (ICM2011), Turkey, April 2011.
  8. Norouzi, S., Arzanpour, S., 2010, “Modeling Flutter Using Deflection-Dependent Strain-Rate Damping Coefficient”, IMECE2010-40622.
  9. Arjmand, E.,Arzanpour, S., 2010, “Analysis of the Electro-Mechanical Nonlinearities in a Bulk Microresonator”, IMECE2010-40493.
  10. Mohareri, O., Arzanpour, S., 2010, “Vibration Energy Harvesting of a Hydraulic Engine Mount Using a Turbine”, IMECE2010-40220.
  11. Rashidi, Y., Arzanpour, S., 2010, “Energy Absorption And Dissipation Performance in Cycloid Guided Pendulum Absorbers, IMECE2010-39835.
  12. Sabzehgar, R., Arzanpour, S., 2010, “Energy Harvesting from Bike Using Linear DC Motor”, IMECE2010-39743.
  13. Khameneifar, F., Arzanpour, S., 2010, “Energy Harvesting From an Engine Mount Using Piezoelectric Materials”, IMECE2010-39545.
  14. Khameneifar, F., Arzanpour, S., 2010, “Piezoelectric Materials in the Design of an Active Decoupler Hydraulic Engine Mount”, IMECE2010-39542.
  15. Gravel, P., Mansour, H., Golnaraghi, F., Arzanpour, S., 2010, “A Comparative Study to Measure Audible Release (Crepitus) From Human Joints, IMECE2010-39367.
  16. Zakeri, V.,Arzanpour, S., 2010, “Developing a Sliding-Mode Speed Controller for Air Turbines Using a PWM Solenoid Valve”, IMECE2010-40228.
  17. Khameneifar, F., Arzanpour, S., 2008, “Energy Harvesting from Pneumatic Tires Using Piezoelectric Transducers”, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS08-426.
  18. Zakeri,V., Arzanpour, S., 2009, “A Comparative Study of Different Controlling Methods of a MR Damper in a Haptic Interface System”, ASME conference, IMECE2009-12878.
  19. Mansour, H., Alghassi, H., Arzanpour, S., Behzad, M., 2009, “A comprehensive investigation on bridge effect in sound produced by Setar”, ASME conference, IMECE2009-13048.
  20. Mansour, H., Arzanpour, S., Behzad, M., 2009, “Vibration analysis of Setar for extracting the frequency response”, ASME conference, IMECE2009-13031.
  21. Mansour, H., Arzanpour, S., Behzad, M., Kasaizadeh, A. R., 2009, “Finite element modeling of Setar, a stringed musical instrument”, ASME conference, IMECE2009-13015.
  22. Mansour, H., Arzanpour, S., Golnaraghi, F., Parameswaran, A.M., 2008, “Semi-Active Engine Mount Development for Variable Displacement Engine Application” Cansmart 2008, pp. 159-167.
  23. Zakeri, V., Arzanpour, S., Golnaraghi, F., 2008, “Development of an Active Compliance Chamber for Hydraulic Engine Bushings”, WAC 2008.
  24. Eslaminasab, N., Arzanpour, S., and Golnaraghi, F., 2007a, “Optimal Design of Asymmetric Passive and Semi-active Dampers” Proceedings of IMECE 2007, IMECE2007-42176.
  25. Arzanpour, S., Eslaminasab, N., Schubert, B., Narimani, A., Golnaraghi, M.F., 2006, “A Novel Technique for Frequency and Time Optimization of Automotive Engine Mount Parameters”, IMECE 2006-14911.
  26. Arzanpour, S., Golnaraghi, M.F., 2006, “Developing of an Active Hydraulic Bushing for Multi-Displacement Engines”, IMECE 2006-14935.
  27. Arzanpour, S., Golnaraghi, M.F., 2006, “MR Bushing Development for VDE Engine Isolation”, Cansmart 2006.
  28. Arzanpour, S., Mills, J.K., Cleghorn W.L, 2003, “Three Fingered Flexible Fixture Design,” ASME DETC and CIE 2003, DETC2003/VIB-48500

Patents

  1. Harirforoush, R., Arzanpour, S., Percussion Based Dental Implant Stability Measurement System, Submitted to SFU Innovation Office in October 2012.
  2. Dehghani, H., Arzanpour, S., 2012, Inflation Method and Apparatus for Airbag, WO/2012/103640, PCT/CA2012/000101.
  3. Zakeri, V., Arzanpour, S., 2010, Intelligent Dental Handpiece Control System, USPTO 2011/0256496

 

 

 

 

 

 

 

 

 

 

 

 
Main Page    
Simon Fraser University | Engineering Science | Mechatronic Systems Engineering