Please note:
To view the Summer 2024 Academic Calendar, go to www.sfu.ca/students/calendar/2024/summer.html.
Engineering Science, Biomedical Engineering Option Honours
This honours program leads to a bachelor of applied science degree (honours) with a biomedical engineering option.
The program concerns engineering problems encountered in medical and surgical treatment, in rehabilitation procedures and assistive devices, in medical electronics, in biomedical imaging, and in biophotonics.
Engineering science students develop skills in systems design with a high level of scientific knowledge. This demanding program is aimed at the superior student. The program produces well educated, innovative engineer/scientists with entrepreneurial skills and attitudes who are oriented to new technologies. Program entry is competitive.
Students undertake a basic core of pure, applied and engineering sciences followed by studies in a specialized option. The honours BASc program may be completed in a total of nine academic terms plus a minimum of three co-op terms.
ENSC courses emphasize learning, conceptualization, design and analysis. Built into the program are courses on social impacts of technology, finance, management, design methods and entrepreneurship intended to complement scientific studies. A special, integrated communications course completed throughout the program ensures that all graduates have the communication skills necessary to be effective engineers.
Admission Requirements
The program begins each fall term. However, admitted students may enter in any term.
For detailed university admission requirements, visit www.sfu.ca/students/admission/admission-requirements.html. For more detailed School of Engineering Science admission information, visit www.sfu.ca/engineering.html, or send an email to asadvise@sfu.ca.
Minimum Admission Requirements
Applicants must be eligible for university admission, must submit a university application, and must have successfully completed the following high school courses: Physics 12, Mathematics 12, Chemistry 12, and English 12.
External Transfer from Another Post-Secondary Institution
Admission is competitive. A minimum of 24 units of transferable coursework is required, including:
- at least one mathematics course chosen from: MATH 152, MATH 232 (or 240);
- at least one computing course chosen from: CMPT 128 (or 135; or (125 and 127)), 225 and ENSC 151;
- at least one physics course chosen from: PHYS 121 (or 141), PHYS 221, and PHYS 321
Please see www.sfu.ca/students/admission/admission-requirements.html for further information.
Internal Transfer from Another Simon Fraser University Program
Simon Fraser University students who wish to transfer to engineering science from another program should formally apply for an internal transfer. The qualification for internal transfer will be calculated based on the following four criteria: CGPA, engineering related grade point average (ERGPA) at Simon Fraser University, no more than five repeated courses, and the course load during the term prior to the application deadline. In regards to the course load, we require the term prior to requesting the transfer to the School of Engineering Science, that the student must have been enrolled in at least 12 Simon Fraser University course load units and earned an overall CGPA of 2.5 or higher. Further, Simon Fraser University students applying for admission to the School of Engineering Science are competitively selected for admission on the basis of an engineering-related grade point average (ERGPA). Typically, we expect the ERGPA to be as high as 2.8, and the ERGPA is determined based on the number of seats available. Therefore, meeting the minimum requirements does not guarantee admission. The ERGPA is calculated over all courses the student has taken from this list, where a minimum of three courses from this list is required, such that:
- at least one mathematics course chosen from MATH 151 (or 150), MATH 152, MATH 232 (or 240), MACM 101, MACM 201
- at least one computing course chosen from CMPT 128 or 135 or (125 and 127), 225, 275 and ENSC 151
- at least one physics course chosen from PHYS 120 (or 140), PHYS 121 (or 141), PHYS 221, PHYS 321, PHYS 365
- additional courses may include: CHEM 121
All three courses must be completed prior to application. For complete information, contact an Applied Sciences Advisor. If a course is a duplicate of any previous course completed at Simon Fraser University or elsewhere, only the last attempt will be included in the average. Admission is competitive and the admission average is established on a per term basis, depending on the number of spaces available.
Second Degree
Please see www.sfu.ca/students/calendar/programs/engineering-science-second-degree/bachelor-of-applied-science.html for information on the requirements for admission to the second degree program. Program requirements for the biomedical engineering option are listed below.
Minimum Grading Requirements
A C- grade or better in prerequisite courses is required to enroll in engineering science courses. In addition, students are required to have a minimum CGPA of 2.4 to enroll in 300 and 400 level engineering science courses. Engineering science students with a CGPA below 2.4 need to see an advisor to obtain approval before enrolling. Students outside the Faculty of Applied Science may not enroll with a CGPA below 2.4. Please see https://www.sfu.ca/students/calendar/faculties-research/faculty-applied-sciences.html for information on the minimum CGPA required to remain in the engineering science program.
Co-operative Education Work Experience
Every engineering science student completes three (3) work terms of practical experience in an appropriate industrial or research setting leading to a project under the technical direction of a practising engineer or scientist. The goal is a complementary combination of work in an industrial or research setting and study in one of the engineering options. The internship may be within the university but in most cases the work site is off campus.
After the first year, students typically alternate between academic and work terms.
At least two of the three mandatory work terms must be completed in industry (ENSC 195, 295, 395). Students may participate in additional work terms but are encouraged to seek diversity in their experience. The three mandatory work terms may include one special co-op term (ENSC 196, 296, 396). Special co-op may include, but is not restricted to, self-directed, entrepreneurial, service or research co-op work terms. Permission of the engineering science co-op office is required.
An optional non-technical work term (ENSC 194) is also available through the engineering science co-operative education office and is often completed after the first two study terms. ENSC 194 does not count toward the mandatory three course requirement.
The engineering science co-operative education program will also seek opportunities for students wishing to complete their thesis requirements in an industrial setting. The honours thesis work can be done on or off campus, either integrated with an optional (or mandatory) work term, or as independent work with appropriate supervision.
Upper Division Enrollment Requirements
To be eligible to enroll in upper division engineering courses, excluding ENSC 320, students must have declared their option.
There is an absolute minimum of 80 units completed to enroll in 400-level courses. Please note that specific courses may have higher requirements.
Program Requirements
Students complete the engineering science core course requirements as shown below, which includes additional course requirements for this biomedical engineering option. These courses provide basic science, general studies, engineering science, specialized engineering and science, and project and laboratory work.
This program’s core course requirements also consist of non-technical courses which broaden education and develop awareness of social, economic and managerial factors affecting engineering and scientific work.
Although there is no strict requirement to complete the curriculum in the sequence that is strongly suggested by the school, deviating from the course completion schedule may lead to scheduling and prerequisite problems in subsequent terms. To view the suggested course schedule, visit http://www.sfu.ca/engineering/current-students/undergraduate-students/programs-and-requirements/biomedical-engineering/curriculum-revised.html.
Core Course Requirements
The following core courses are required by the engineering science honours program in biomedical engineering and cannot be substituted for "equivalent" courses in other areas without prior approval by the school. "Equivalent" courses taken without prior approval will not be applied to graduation requirements. Students should consult an academic advisor within their program for details on obtaining permission.
This course will cover the application of basic mechanics to human movement. It will provide students with a basic understanding of how forces act on body segments and how movements are produced. The subject matter of this course is relevant to quantifying all forms of physical activity, from activities of daily living, physically challenged movement patterns, to elite athletic performance. It also has applications in medical settings, including rehabilitation and sports medicine. Prerequisite: MATH 150, 151 or 154, MATH 152 or 155 (may be taken concurrently), PHYS 101 (or 120 or 125 or 140), BPK 142. Quantitative.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Maxwell Donelan |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 1:30–2:20 p.m.
Oct 15, 2024: Tue, 1:30–2:20 p.m. |
Burnaby Burnaby |
D101 |
Sep 4 – Dec 3, 2024: Thu, 9:30–10:20 a.m.
|
Burnaby |
|
D102 |
Sep 4 – Dec 3, 2024: Thu, 10:30–11:20 a.m.
|
Burnaby |
|
D103 |
Sep 4 – Dec 3, 2024: Thu, 11:30 a.m.–12:20 p.m.
|
Burnaby |
|
D104 |
Sep 4 – Dec 3, 2024: Thu, 1:30–2:20 p.m.
|
Burnaby |
|
D105 |
Sep 4 – Dec 3, 2024: Thu, 2:30–3:20 p.m.
|
Burnaby |
|
D106 |
Sep 4 – Dec 3, 2024: Thu, 3:30–4:20 p.m.
|
Burnaby |
An introduction to anatomy and physiological function of the major human systems, from a biomedical engineering perspective. Normally only available to students in the Biomedical Engineering Program. Corequisite: CHEM 180. BPK 208 may be used as a substitute for BPK 105 by students in the Kinesiology Minor program. BPK Major and Honours students may not receive credit for BPK 208. No student may take both BPK 105 and BPK 208 for credit, or both BPK 205 and BPK 208 for credit.
Lab exercises will provide a hands-on experience in the acquisition of physiological data and mathematical and computer modeling of physiological systems. Lectures will provide an advanced understanding of select human physiological systems. Prerequisite: BPK 208 or all of BPK 205, 201, STAT 201 and a strong mathematical background.
Atomic and molecular structure; chemical bonding; thermochemistry; elements; periodic table; gases liquids, solids, and solutions. This course includes a laboratory component. Prerequisite: Chemistry 12 with a minimum grade of B, or CHEM 109 or 111 with a minimum grade of C-. Students with credit for CHEM 120 or 125 may not take this course for further credit. Quantitative/Breadth-Science.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Daniel Leznoff Jeffrey Warren |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 10:30–11:20 a.m.
Oct 15, 2024: Tue, 10:30–11:20 a.m. |
Burnaby Burnaby |
D101 |
Sep 4 – Dec 3, 2024: Wed, 8:30–9:20 a.m.
|
Burnaby |
|
D102 |
Sep 4 – Dec 3, 2024: Fri, 8:30–9:20 a.m.
|
Burnaby |
|
D103 |
Sep 4 – Dec 3, 2024: Wed, 9:30–10:20 a.m.
|
Burnaby |
|
D104 |
Sep 4 – Dec 3, 2024: Wed, 9:30–10:20 a.m.
|
Burnaby |
|
D105 |
Sep 4 – Dec 3, 2024: Wed, 9:30–10:20 a.m.
|
Burnaby |
|
D106 |
Sep 4 – Dec 3, 2024: Fri, 9:30–10:20 a.m.
|
Burnaby |
|
D107 |
Sep 4 – Dec 3, 2024: Fri, 9:30–10:20 a.m.
|
Burnaby |
|
D108 |
Sep 4 – Dec 3, 2024: Fri, 9:30–10:20 a.m.
|
Burnaby |
|
D109 |
Sep 4 – Dec 3, 2024: Wed, 11:30 a.m.–12:20 p.m.
|
Burnaby |
|
D110 |
Sep 4 – Dec 3, 2024: Wed, 11:30 a.m.–12:20 p.m.
|
Burnaby |
|
D111 |
Sep 4 – Dec 3, 2024: Wed, 11:30 a.m.–12:20 p.m.
|
Burnaby |
|
D112 |
Sep 4 – Dec 3, 2024: Fri, 11:30 a.m.–12:20 p.m.
|
Burnaby |
|
D113 |
Sep 4 – Dec 3, 2024: Fri, 11:30 a.m.–12:20 p.m.
|
Burnaby |
|
D114 |
Sep 4 – Dec 3, 2024: Fri, 11:30 a.m.–12:20 p.m.
|
Burnaby |
|
D115 |
Sep 4 – Dec 3, 2024: Wed, 12:30–1:20 p.m.
|
Burnaby |
|
D116 |
Sep 4 – Dec 3, 2024: Wed, 12:30–1:20 p.m.
|
Burnaby |
|
D117 |
Sep 4 – Dec 3, 2024: Wed, 12:30–1:20 p.m.
|
Burnaby |
|
D118 |
Sep 4 – Dec 3, 2024: Fri, 12:30–1:20 p.m.
|
Burnaby |
|
D119 |
Sep 4 – Dec 3, 2024: Fri, 12:30–1:20 p.m.
|
Burnaby |
|
D120 |
Sep 4 – Dec 3, 2024: Fri, 12:30–1:20 p.m.
|
Burnaby |
|
D121 |
Sep 4 – Dec 3, 2024: Wed, 1:30–2:20 p.m.
|
Burnaby |
|
D122 |
Sep 4 – Dec 3, 2024: Fri, 1:30–2:20 p.m.
|
Burnaby |
|
D123 |
Sep 4 – Dec 3, 2024: Thu, 10:30–11:20 a.m.
|
Burnaby |
|
D124 |
Sep 4 – Dec 3, 2024: Thu, 11:30 a.m.–12:20 p.m.
|
Burnaby |
|
D125 |
Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
|
Burnaby |
|
D200 |
Daniel Leznoff Jeffrey Warren |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 12:30–1:20 p.m.
Oct 15, 2024: Tue, 12:30–1:20 p.m. |
Burnaby Burnaby |
D201 |
Sep 4 – Dec 3, 2024: Wed, 8:30–9:20 a.m.
|
Burnaby |
|
D202 |
Sep 4 – Dec 3, 2024: Fri, 8:30–9:20 a.m.
|
Burnaby |
|
D203 |
Sep 4 – Dec 3, 2024: Wed, 10:30–11:20 a.m.
|
Burnaby |
|
D204 |
Sep 4 – Dec 3, 2024: Fri, 10:30–11:20 a.m.
|
Burnaby |
|
D205 |
Sep 4 – Dec 3, 2024: Wed, 1:30–2:20 p.m.
|
Burnaby |
|
D206 |
Sep 4 – Dec 3, 2024: Fri, 1:30–2:20 p.m.
|
Burnaby |
|
D207 |
Sep 4 – Dec 3, 2024: Thu, 10:30–11:20 a.m.
|
Burnaby |
|
D208 |
Sep 4 – Dec 3, 2024: Thu, 11:30 a.m.–12:20 p.m.
|
Burnaby |
|
D209 |
Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
|
Burnaby |
|
D300 |
Rebecca Goyan |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m. |
Surrey Surrey |
D301 |
Sep 4 – Dec 3, 2024: Mon, 10:30–11:20 a.m.
Oct 15, 2024: Tue, 10:30–11:20 a.m. |
Surrey Surrey |
|
D302 |
Sep 4 – Dec 3, 2024: Mon, 11:30 a.m.–12:20 p.m.
Oct 15, 2024: Tue, 11:30 a.m.–12:20 p.m. |
Surrey Surrey |
|
D303 |
Sep 4 – Dec 3, 2024: Mon, 12:30–1:20 p.m.
Oct 15, 2024: Tue, 12:30–1:20 p.m. |
Surrey Surrey |
|
D306 |
Sep 4 – Dec 3, 2024: Wed, 10:30–11:20 a.m.
|
Surrey |
|
D307 |
Sep 4 – Dec 3, 2024: Wed, 11:30 a.m.–12:20 p.m.
|
Surrey |
|
D308 |
Sep 4 – Dec 3, 2024: Wed, 12:30–1:20 p.m.
|
Surrey |
|
D309 |
Sep 4 – Dec 3, 2024: Mon, 10:30–11:20 a.m.
Oct 15, 2024: Tue, 10:30–11:20 a.m. |
Surrey Surrey |
|
D600 |
Rebecca Goyan |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m. |
Surrey Surrey |
D601 |
Sep 4 – Dec 3, 2024: Wed, 9:30–10:20 a.m.
|
Surrey |
|
LA03 |
Garry Mund |
Sep 4 – Oct 11, 2024: Tue, 1:30–5:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–5:20 p.m. |
Burnaby Burnaby |
LA04 |
Garry Mund |
Sep 4 – Dec 3, 2024: Wed, 1:30–5:20 p.m.
|
Burnaby |
LA06 |
Garry Mund |
Sep 4 – Dec 3, 2024: Thu, 1:30–5:20 p.m.
|
Burnaby |
LA07 |
Garry Mund |
Sep 4 – Dec 3, 2024: Fri, 1:30–5:20 p.m.
|
Burnaby |
LB03 |
Garry Mund |
Sep 4 – Oct 11, 2024: Tue, 1:30–5:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–5:20 p.m. |
Burnaby Burnaby |
LB04 |
Garry Mund |
Sep 4 – Dec 3, 2024: Wed, 1:30–5:20 p.m.
|
Burnaby |
LB05 |
Garry Mund |
Sep 4 – Dec 3, 2024: Thu, 8:30 a.m.–12:20 p.m.
|
Burnaby |
LB06 |
Garry Mund |
Sep 4 – Dec 3, 2024: Thu, 1:30–5:20 p.m.
|
Burnaby |
LB07 |
Garry Mund |
Sep 4 – Dec 3, 2024: Fri, 1:30–5:20 p.m.
|
Burnaby |
LB13 |
Garry Mund |
Sep 4 – Oct 11, 2024: Tue, 1:30–5:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–5:20 p.m. |
Burnaby Burnaby |
LB14 |
Garry Mund |
Sep 4 – Dec 3, 2024: Wed, 1:30–5:20 p.m.
|
Burnaby |
LB15 |
Garry Mund |
Sep 4 – Dec 3, 2024: Thu, 8:30 a.m.–12:20 p.m.
|
Burnaby |
LB16 |
Garry Mund |
Sep 4 – Dec 3, 2024: Thu, 1:30–5:20 p.m.
|
Burnaby |
LB17 |
Garry Mund |
Sep 4 – Dec 3, 2024: Fri, 1:30–5:20 p.m.
|
Burnaby |
LC01 |
Rebecca Goyan |
Sep 4 – Oct 11, 2024: Tue, 1:30–5:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–5:20 p.m. |
Surrey Surrey |
LC02 |
Rebecca Goyan |
Sep 4 – Dec 3, 2024: Wed, 1:30–5:20 p.m.
|
Surrey |
LC06 |
Rebecca Goyan |
Sep 4 – Dec 3, 2024: Wed, 1:30–5:20 p.m.
|
Surrey |
LE01 | TBD | ||
LE02 | TBD | ||
LE03 | TBD |
A basic introduction to chemical kinetics, thermodynamics, electrochemistry, and equilibria as they apply to the structure and function of biomolecules. Concepts will be illustrated using modern examples of biological systems. Students will be introduced to central ideas and selected molecular engineering methods in biochemistry and molecular biology. Prerequisite: CHEM 121 with a minimum grade of C-. Students with credit for CHEM 122 or CHEM 124 may not take this course for further credit.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
John Canal Charles Walsby |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 12:30–1:20 p.m.
Oct 15, 2024: Tue, 12:30–1:20 p.m. |
Burnaby Burnaby |
D101 |
Sep 4 – Oct 11, 2024: Tue, 9:30–10:20 a.m.
Oct 16 – Dec 3, 2024: Tue, 9:30–10:20 a.m. |
Burnaby Burnaby |
The principal elements of theory concerning utility and value, price and costs, factor analysis, productivity, labor organization, competition and monopoly, and the theory of the firm. Quantitative/Breadth-Soc.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Douglas Allen |
Sep 4 – Dec 3, 2024: Mon, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m. Sep 4 – Dec 3, 2024: Thu, 8:30–10:20 a.m. |
Burnaby Burnaby Burnaby |
D101 |
Sep 4 – Oct 11, 2024: Tue, 8:30–9:20 a.m.
Oct 16 – Dec 3, 2024: Tue, 8:30–9:20 a.m. |
Burnaby Burnaby |
|
D102 |
Sep 4 – Dec 3, 2024: Wed, 8:30–9:20 a.m.
|
Burnaby |
|
D103 |
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–12:20 p.m. |
Burnaby Burnaby |
|
D106 |
Sep 4 – Dec 3, 2024: Mon, 12:30–1:20 p.m.
Oct 15, 2024: Tue, 12:30–1:20 p.m. |
Burnaby Burnaby |
|
D109 |
Sep 4 – Dec 3, 2024: Wed, 12:30–1:20 p.m.
|
Burnaby |
|
D110 |
Sep 4 – Dec 3, 2024: Wed, 1:30–2:20 p.m.
|
Burnaby |
|
D114 |
Sep 4 – Oct 11, 2024: Tue, 8:30–9:20 a.m.
Oct 16 – Dec 3, 2024: Tue, 8:30–9:20 a.m. |
Burnaby Burnaby |
|
D200 |
Marie Rekkas |
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–1:20 p.m. Sep 4 – Dec 3, 2024: Thu, 11:30 a.m.–12:20 p.m. |
Burnaby Burnaby Burnaby |
D201 |
Sep 4 – Dec 3, 2024: Thu, 10:30–11:20 a.m.
|
Burnaby |
|
D202 |
Sep 4 – Dec 3, 2024: Thu, 9:30–10:20 a.m.
|
Burnaby |
|
D203 |
Sep 4 – Dec 3, 2024: Thu, 8:30–9:20 a.m.
|
Burnaby |
|
D204 |
Sep 4 – Dec 3, 2024: Wed, 8:30–9:20 a.m.
|
Burnaby |
|
D205 |
Sep 4 – Dec 3, 2024: Wed, 9:30–10:20 a.m.
|
Burnaby |
|
D206 |
Sep 4 – Dec 3, 2024: Wed, 10:30–11:20 a.m.
|
Burnaby |
|
D207 |
Sep 4 – Dec 3, 2024: Wed, 12:30–1:20 p.m.
|
Burnaby |
|
D208 |
Sep 4 – Dec 3, 2024: Wed, 11:30 a.m.–12:20 p.m.
|
Burnaby |
|
D209 |
Sep 4 – Dec 3, 2024: Thu, 8:30–9:20 a.m.
|
Burnaby |
|
D210 |
Sep 4 – Dec 3, 2024: Thu, 9:30–10:20 a.m.
|
Burnaby |
|
D211 |
Sep 4 – Dec 3, 2024: Thu, 10:30–11:20 a.m.
|
Burnaby |
|
D213 |
Sep 4 – Dec 3, 2024: Wed, 10:30–11:20 a.m.
|
Burnaby |
|
D900 |
Yan Yan |
Sep 4 – Dec 3, 2024: Wed, Fri, 10:30 a.m.–12:20 p.m.
|
Surrey |
We study the history of engineering, its changing relationship to the sciences, and its effects upon society. We cover the ethical and environmental implications of engineering choices. We briefly explore the fundamental concepts in artificial intelligence, information theory, and thermodynamics. Students in the course will work together in small teams to complete a practical engineering design project. Corequisite: ENSC 105W. Students with credit for ENSC 100, CMPT 106, ENSC 106, or MSE 102 may not take this course for further credit. Writing/Breadth-Hum/Science.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Wed, 3:30–4:20 p.m.
Sep 4 – Dec 3, 2024: Fri, 2:30–4:20 p.m. |
Burnaby Burnaby |
LA01 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Mon, 10:30–11:20 a.m.
Oct 15, 2024: Tue, 10:30–11:20 a.m. |
Burnaby Burnaby |
LA02 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Mon, 10:30–11:20 a.m.
Oct 15, 2024: Tue, 10:30–11:20 a.m. |
Burnaby Burnaby |
LA03 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Mon, 11:30 a.m.–12:20 p.m.
Oct 15, 2024: Tue, 11:30 a.m.–12:20 p.m. |
Burnaby Burnaby |
LA04 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Mon, 11:30 a.m.–12:20 p.m.
Oct 15, 2024: Tue, 11:30 a.m.–12:20 p.m. |
Burnaby Burnaby |
LA05 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Mon, 1:30–2:20 p.m.
Oct 15, 2024: Tue, 1:30–2:20 p.m. |
Burnaby Burnaby |
LA06 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Mon, 1:30–2:20 p.m.
Oct 15, 2024: Tue, 1:30–2:20 p.m. |
Burnaby Burnaby |
LA07 |
Michael Hegedus |
Sep 4 – Oct 11, 2024: Tue, 10:30–11:20 a.m.
Oct 16 – Dec 3, 2024: Tue, 10:30–11:20 a.m. |
Burnaby Burnaby |
LA08 |
Michael Hegedus |
Sep 4 – Oct 11, 2024: Tue, 10:30–11:20 a.m.
Oct 16 – Dec 3, 2024: Tue, 10:30–11:20 a.m. |
Burnaby Burnaby |
LA09 |
Michael Hegedus |
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–12:20 p.m. |
Burnaby Burnaby |
LA10 |
Michael Hegedus |
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–12:20 p.m. |
Burnaby Burnaby |
LA11 |
Michael Hegedus |
Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m. |
Burnaby Burnaby |
LA12 |
Michael Hegedus |
Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m. |
Burnaby Burnaby |
LA13 |
Michael Hegedus |
Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m. |
Burnaby Burnaby |
LA14 |
Michael Hegedus |
Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m. |
Burnaby Burnaby |
LA15 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Wed, 10:30–11:20 a.m.
|
Burnaby |
LA16 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Wed, 10:30–11:20 a.m.
|
Burnaby |
LA17 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Wed, 11:30 a.m.–12:20 p.m.
|
Burnaby |
LA18 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Wed, 11:30 a.m.–12:20 p.m.
|
Burnaby |
LA19 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Wed, 1:30–2:20 p.m.
|
Burnaby |
LA20 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Wed, 1:30–2:20 p.m.
|
Burnaby |
LA21 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Thu, 10:30–11:20 a.m.
|
Burnaby |
LA22 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Thu, 10:30–11:20 a.m.
|
Burnaby |
LA23 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Thu, 11:30 a.m.–12:20 p.m.
|
Burnaby |
LA24 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Thu, 11:30 a.m.–12:20 p.m.
|
Burnaby |
LA25 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
|
Burnaby |
LA26 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
|
Burnaby |
LA27 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Thu, 1:30–2:20 p.m.
|
Burnaby |
LA28 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Thu, 1:30–2:20 p.m.
|
Burnaby |
LA29 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Fri, 10:30–11:20 a.m.
|
Burnaby |
LA30 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Fri, 10:30–11:20 a.m.
|
Burnaby |
LA31 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Fri, 11:30 a.m.–12:20 p.m.
|
Burnaby |
LA32 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Fri, 11:30 a.m.–12:20 p.m.
|
Burnaby |
LA33 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Mon, 2:30–3:20 p.m.
Oct 15, 2024: Tue, 2:30–3:20 p.m. |
Burnaby Burnaby |
LA34 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Mon, 2:30–3:20 p.m.
Oct 15, 2024: Tue, 2:30–3:20 p.m. |
Burnaby Burnaby |
LA35 |
Michael Hegedus |
Sep 4 – Dec 3, 2024: Mon, 2:30–3:20 p.m.
Oct 15, 2024: Tue, 2:30–3:20 p.m. |
Burnaby Burnaby |
The course teaches fundamentals of informative and persuasive communication for professional engineers and computer scientists in order to assist students in thinking critically about various contemporary technical, social, and ethical issues. It focuses on communicating technical information clearly and concisely, managing issues of persuasion when communicating with diverse audiences, presentation skills, and teamwork. Corequisite: CMPT 106, ENSC 100 or ENSC 106. Students with credit for CMPT 105W, ENSC 102, MSE 101W or SEE 101W may not take ENSC 105W for further credit. Writing.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Michael Sjoerdsma |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 12:30–1:20 p.m.
Oct 15, 2024: Tue, 12:30–1:20 p.m. |
Burnaby Burnaby |
This introductory laboratory course will familiarize the students with operating electronics laboratory instrumentation such as linear power supply, digital multi-meter, function generator and oscilloscope. Students are expected to perform 6 lab experiments and submit a work-sheet for each lab session. A final examination will be conducted (individually) to test the proficiency. Laboratory and workplace safety lectures and examinations are covered in this course. Prerequisite: BC Pre-Calculus 12 and BC Physics 12 (or equivalents).
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Atousa Hajshirmohammadi |
Sep 4 – Dec 3, 2024: Thu, 8:30–10:20 a.m.
|
Burnaby |
LA01 |
Atousa Hajshirmohammadi |
Sep 4 – Oct 11, 2024: Tue, 10:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 10:30 a.m.–12:20 p.m. |
Burnaby Burnaby |
LA02 |
Atousa Hajshirmohammadi |
Sep 4 – Oct 11, 2024: Tue, 10:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 10:30 a.m.–12:20 p.m. |
Burnaby Burnaby |
LA03 |
Atousa Hajshirmohammadi |
Sep 4 – Dec 3, 2024: Wed, 10:30 a.m.–12:20 p.m.
|
Burnaby |
LA05 |
Atousa Hajshirmohammadi |
Sep 4 – Dec 3, 2024: Thu, 10:30 a.m.–12:20 p.m.
|
Burnaby |
An introduction to software development for students in engineering and related programs covering theory and practicum of software design, testing, and debugging. This includes basic C++ programming language elements such as basic types, variables, expressions, statements, exception handling, functions, simple classes, and an introduction to the C++ standard library. Prerequisite: BC Math 12 (or equivalent, or any of MATH 100, 150, 151, 154, or 157, with a minimum grade of C-). Students who have taken ENSC 251, CMPT 125, 129, 135, or CMPT 200 or higher first may not then take this course for further credit.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Yuri Reis Rodrigues |
Sep 4 – Oct 11, 2024: Tue, Thu, 2:30–4:20 p.m.
Oct 16 – Dec 3, 2024: Tue, Thu, 2:30–4:20 p.m. |
Burnaby Burnaby |
LA01 |
Yuri Reis Rodrigues |
Sep 4 – Oct 11, 2024: Tue, 12:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–2:20 p.m. |
Burnaby Burnaby |
LA02 |
Yuri Reis Rodrigues |
Sep 4 – Oct 11, 2024: Tue, 4:30–6:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 4:30–6:20 p.m. |
Burnaby Burnaby |
LA03 |
Yuri Reis Rodrigues |
Sep 4 – Dec 3, 2024: Wed, 4:30–6:20 p.m.
|
Burnaby |
LA04 |
Yuri Reis Rodrigues |
Sep 4 – Dec 3, 2024: Thu, 12:30–2:20 p.m.
|
Burnaby |
LA05 |
Sep 4 – Dec 3, 2024: Thu, 4:30–6:20 p.m.
|
Burnaby |
|
LA06 |
Yuri Reis Rodrigues |
Sep 4 – Dec 3, 2024: Fri, 10:30 a.m.–12:20 p.m.
|
Burnaby |
Introduction to MATLAB and its use in engineering. Implementation, verification, and analysis of various engineering algorithms used in signal and image processing, robotics, communications engineering. Prerequisite: (ENSC 151 or CMPT 120 or CMPT 130) and (MATH 151 or MATH 150), all with a minimum grade of C-. Corequisite: MATH 152 and MATH 232.
An introduction to engineering graphical communication, Computer Aided Design (CAD) and workshop usage. Objectives are to improve students' literacy in the use of graphics to communicate engineering information, and their ability to visualize and create 3D models. The use of CAD software in creating 3D solid models are introduced. Students who have taken ENSC 104, MSE 100 or SEE 100 first may not then take this course for further credit.
Section | Instructor | Day/Time | Location |
---|---|---|---|
E100 |
Mohammad Soltanshah |
Sep 4 – Dec 3, 2024: Wed, 4:30–6:20 p.m.
|
Burnaby |
LA01 |
Mohammad Soltanshah |
Sep 4 – Oct 11, 2024: Tue, 2:30–4:20 p.m.
Sep 4 – Oct 11, 2024: Tue, 2:30–4:20 p.m. Oct 16 – Dec 3, 2024: Tue, 2:30–4:20 p.m. Oct 16 – Dec 3, 2024: Tue, 2:30–4:20 p.m. |
Burnaby Burnaby Burnaby Burnaby |
LA02 |
Mohammad Soltanshah |
Sep 4 – Oct 11, 2024: Tue, 4:30–6:20 p.m.
Sep 4 – Oct 11, 2024: Tue, 4:30–6:20 p.m. Oct 16 – Dec 3, 2024: Tue, 4:30–6:20 p.m. Oct 16 – Dec 3, 2024: Tue, 4:30–6:20 p.m. |
Burnaby Burnaby Burnaby Burnaby |
LA03 |
Mohammad Soltanshah |
Sep 4 – Dec 3, 2024: Wed, 12:30–2:20 p.m.
Sep 4 – Dec 3, 2024: Wed, 12:30–2:20 p.m. |
Burnaby Burnaby |
LA04 |
Mohammad Soltanshah |
Sep 4 – Dec 3, 2024: Wed, 2:30–4:20 p.m.
Sep 4 – Dec 3, 2024: Wed, 2:30–4:20 p.m. |
Burnaby Burnaby |
LA05 |
Mohammad Soltanshah |
Sep 4 – Dec 3, 2024: Fri, 12:30–2:20 p.m.
Sep 4 – Dec 3, 2024: Fri, 12:30–2:20 p.m. |
Burnaby Burnaby |
Fundamental electrical circuit quantities, and circuit elements; circuits laws such as Ohm law, Kirchoff's voltage and current laws, along with series and parallel circuits; operational amplifiers; network theorems; nodal and mesh methods; analysis of natural and step response of first (RC and RL), as well as second order (RLC) circuits; real, reactive and rms power concepts. In addition, the course will discuss the worker safety implications of both electricity and common laboratory practices such as soldering. Prerequisite: (PHYS 121 or PHYS 126 or PHYS 141), ENSC 120, MATH 232 and (MATH 260 or MATH 310), all with a minimum grade of C-. MATH 260 may be taken concurrently. Students with credit for MSE 250 or SEE 230 cannot take this course for further credit. Quantitative.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Bernhard Rabus |
Sep 4 – Dec 3, 2024: Wed, Fri, 2:30–4:20 p.m.
|
Burnaby |
LA01 |
Bernhard Rabus |
Sep 4 – Dec 3, 2024: Mon, 11:30 a.m.–1:20 p.m.
Oct 15, 2024: Tue, 11:30 a.m.–1:20 p.m. |
Burnaby Burnaby |
LA02 |
Bernhard Rabus |
Sep 4 – Dec 3, 2024: Mon, 2:30–4:20 p.m.
Oct 15, 2024: Tue, 2:30–4:20 p.m. |
Burnaby Burnaby |
LA03 |
Bernhard Rabus |
Sep 4 – Dec 3, 2024: Mon, 4:30–6:20 p.m.
Oct 15, 2024: Tue, 4:30–6:20 p.m. |
Burnaby Burnaby |
LA05 |
Bernhard Rabus |
Sep 4 – Dec 3, 2024: Wed, 12:30–2:20 p.m.
|
Burnaby |
This course teaches analog/digital electronics and basic device physics in the context of modern silicon integrated circuits technology. Topics include: qualitative device physics and terminal characteristics; implementations and models of basic semiconductor devices (diodes, BJTs and MOSFETs); circuit simulation via SPICE; basic diode circuits; transistors as amplifiers and switching elements; temperature effects and compensation; single-stage transistor amplifiers; biasing, current sources and mirrors. Prerequisite: (ENSC 220 or MSE 250), MATH 232, and (MATH 260 or MATH 310), all with a minimum grade of C-. Students taking or with credit for ENSC 226, MSE 251 or SEE 231 may not take ENSC 225 for further credit. Quantitative.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Ash Parameswaran |
Sep 4 – Oct 11, 2024: Tue, Thu, 10:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, Thu, 10:30 a.m.–12:20 p.m. |
Burnaby Burnaby |
OPL1 | TBD |
Fundamentals for designing and implementing modular programs using a modern object-oriented programming language with a focus on understanding the performance implications of design choices on non-traditional computing platforms. Lecture topics include: classes; objects; debugging, testing & verification; design analysis & abstraction; error handling; fundamental data structures such as lists, trees, and graphs; and big-0 complexity analysis. Prerequisite: ENSC 151 or CMPT 135 or (CMPT 125 and CMPT 127), all with a minimum grade of C-.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Herbert Tsang |
Sep 4 – Oct 11, 2024: Tue, 12:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–2:20 p.m. Sep 4 – Dec 3, 2024: Thu, 12:30–2:20 p.m. |
Burnaby Burnaby Burnaby |
LA01 |
Herbert Tsang |
Sep 4 – Dec 3, 2024: Mon, 11:30 a.m.–1:20 p.m.
Oct 15, 2024: Tue, 11:30 a.m.–1:20 p.m. |
Burnaby Burnaby |
LA02 |
Herbert Tsang |
Sep 4 – Dec 3, 2024: Mon, 2:30–4:20 p.m.
Oct 15, 2024: Tue, 2:30–4:20 p.m. |
Burnaby Burnaby |
LA03 |
Herbert Tsang |
Sep 4 – Dec 3, 2024: Mon, 4:30–6:20 p.m.
Oct 15, 2024: Tue, 4:30–6:20 p.m. |
Burnaby Burnaby |
LA04 |
Herbert Tsang |
Sep 4 – Oct 11, 2024: Tue, 2:30–4:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–4:20 p.m. |
Burnaby Burnaby |
OPT1 |
Herbert Tsang |
TBD |
Design of digital systems. In particular, students will learn basic digital design concepts including the implementation of synthesizable combinational and sequential logic using HDL and computer based design tools to implement their designs on a FPGA. Prerequisite: ENSC 151 or CMPT 125 or CMPT 126 or CMPT 135, with a minimum grade of C-. ENSC 252 is a required course for all engineering science majors and honours students (no course substitutions are permitted). Students with credit for ENSC/CMPT 150 or ENSC 329/MSE 350 cannot take this course for further credit.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Rafegabeham Ahamedsheriff |
Sep 4 – Oct 11, 2024: Tue, Thu, 8:30–10:20 a.m.
Oct 16 – Dec 3, 2024: Tue, Thu, 8:30–10:20 a.m. |
Burnaby Burnaby |
LA01 |
Rafegabeham Ahamedsheriff |
Sep 4 – Dec 3, 2024: Mon, 11:30 a.m.–1:20 p.m.
Sep 4 – Dec 3, 2024: Mon, 11:30 a.m.–1:20 p.m. Oct 15, 2024: Tue, 11:30 a.m.–1:20 p.m. Oct 15, 2024: Tue, 11:30 a.m.–1:20 p.m. |
Burnaby Burnaby Burnaby Burnaby |
LA02 |
Rafegabeham Ahamedsheriff |
Sep 4 – Dec 3, 2024: Mon, 2:30–4:20 p.m.
Sep 4 – Dec 3, 2024: Mon, 2:30–4:20 p.m. Oct 15, 2024: Tue, 2:30–4:20 p.m. Oct 15, 2024: Tue, 2:30–4:20 p.m. |
Burnaby Burnaby Burnaby Burnaby |
LA04 |
Rafegabeham Ahamedsheriff |
Sep 4 – Oct 11, 2024: Tue, 2:30–4:20 p.m.
Sep 4 – Oct 11, 2024: Tue, 2:30–4:20 p.m. Oct 16 – Dec 3, 2024: Tue, 2:30–4:20 p.m. Oct 16 – Dec 3, 2024: Tue, 2:30–4:20 p.m. |
Burnaby Burnaby Burnaby Burnaby |
LA05 |
Rafegabeham Ahamedsheriff |
Sep 4 – Dec 3, 2024: Thu, 2:30–4:20 p.m.
Sep 4 – Dec 3, 2024: Thu, 2:30–4:20 p.m. |
Burnaby Burnaby |
OPT1 | TBD |
Fundamentals of microprocessor architecture and operation; this includes instruction formats, assembly language programming (procedures and parameter passing, interrupts, etc), and memory and I/O port interfaces. Prerequisite: (ENSC 251 & ENSC 252) or (CMPT 150 & CMPT 225 & enrolled as a Computing Science Major), all with a minimum grade of C-. ENSC 254 is a required course for all Engineering Science Majors and Honours students (no course substitutions are permitted). Students with credit for, or who are concurrently enrolled in ENSC/CMPT 250 or ENSC 329/MSE 350 cannot take this course for further credit.
Methods to collect and analyze engineering data. Topics include: engineering data representation, discrete and continuous probability density functions, engineering measurements, error analysis, test of hypotheses, linear and nonlinear regression, and design of experiments. This course includes a significant laboratory component comprising: laboratory measurements and statistical analysis of electronic circuits, introduction to electronic device behaviour, instrument noise. Prerequisite: ((PHYS 121 and ENSC 120) or PHYS 141) and (MATH 251 and MATH 232), all with a minimum grade of C-. MATH 251 and/or MATH 232 may be taken concurrently with ENSC 280. Engineering Science Majors and Honours students are required to take ENSC 280 (no course substitutions will be accepted). Students with credit for STAT 270, MSE 210, SEE 241 or PHYS 231 cannot take this course for further credit.
Basic vector calculus concepts required for the course and introduction to waves. Differential forms of Maxwell equations. Capacitors in circuits; capacitance and field energy. Inductors in circuits and inductance; electrical current, electromotive force, electrical resistance. Design considerations for engineering applications in devices through simulations (course project). Prerequisite: MATH 251 and (ENSC 220 or MSE 250), all with a minimum grade of C-.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Bernhard Rabus |
Sep 4 – Dec 3, 2024: Wed, Fri, 8:30–10:20 a.m.
|
Burnaby |
OPT1 |
Bernhard Rabus |
TBD |
Topics covered include: use of Laplace transform in circuit analysis, including poles and zeros, frequency response and impulse response: convolution as a method for computing circuit responses: resonant and bandpass circuits; magnetically coupled circuits; two port circuits; and filtering. Also includes a laboratory component dealing with the design and implementation of active filters. Prerequisite: (ENSC 220 or MSE 250), MATH 232, and (MATH 260 or MATH 310), all with a minimum grade of C-.
This course represents and introduction to analog and digital communications systems. The main topics are: a review of Fourier Transform; the representation of bandpass signals; random signals in communications, including stationarity, ergodicity, correlation, power spectra and noise; amplitude and frequency modulation; circuits and techniques for modulation and demodulation; frequency division multiplexing; baseband digital communication; time division and multiplexing; an introduction to basic digital modulation schemes such as BPSK, FSK and QPSK. Laboratory work is included in this course. Prerequisite: (ENSC 380 or MSE 280) and ENSC 280, all with a minimum grade of C-. Students who completed STAT 270 prior to Spring 2015 may use STAT 270 instead of ENSC 280.
Concentrates on the problems encountered when attempting to use computers in real time (RT) and embedded applications where the computer system must discern the state of the real world and react to it within stringent response time constraints. Both design methodology and practical implementation techniques for RT systems are presented. Although some hardware will be involved, it should be noted that this course concentrates on real time software. Prerequisite: (ENSC 151 and ENSC 215 and ENSC 250) or ENSC 254 or (CMPT 225 and (CMPT 250 or CMPT 295)), all with a minimum grade of C- and a minimum of 60 units. ENSC 351 is a required course for all engineering science major and honours students (no course substitutions are permitted). Students with credit for or who are concurrently enrolled in ENSC 451/MSE 450 cannot take this course for further credit.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Craig Scratchley |
Sep 4 – Dec 3, 2024: Wed, Fri, 2:30–4:20 p.m.
|
Burnaby |
LA01 |
Craig Scratchley |
Sep 4 – Dec 3, 2024: Wed, 10:30 a.m.–12:20 p.m.
Sep 4 – Dec 3, 2024: Wed, 10:30 a.m.–12:20 p.m. |
Burnaby Burnaby |
LA02 |
Craig Scratchley |
Sep 4 – Dec 3, 2024: Wed, 4:30–6:20 p.m.
Sep 4 – Dec 3, 2024: Wed, 4:30–6:20 p.m. |
Burnaby Burnaby |
LA03 |
Craig Scratchley |
Sep 4 – Dec 3, 2024: Fri, 10:30 a.m.–12:20 p.m.
Sep 4 – Dec 3, 2024: Fri, 10:30 a.m.–12:20 p.m. |
Burnaby Burnaby |
LA04 |
Craig Scratchley |
Sep 4 – Dec 3, 2024: Fri, 4:30–6:20 p.m.
Sep 4 – Dec 3, 2024: Fri, 4:30–6:20 p.m. |
Burnaby Burnaby |
OPT1 |
Craig Scratchley |
TBD |
An overview of the discipline of biomedical engineering, including its purpose and scope. Typical discussion topics: goals and limitations of biomedical engineering, the nature and relevant technologies of selected application areas, common aspects of biomedical practice, current trends and new directions in biomedical engineering. Students conduct extended investigations of biomedical practice, new biomedical techniques or possible new products, then prepare reports and present seminars. Prerequisite: Completion of at least 25 units of engineering science (ENSC) courses.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Andrew Rawicz |
Sep 4 – Dec 3, 2024: Fri, 12:30–2:20 p.m.
|
Burnaby |
D101 |
Andrew Rawicz |
Sep 4 – Dec 3, 2024: Wed, 12:30–2:20 p.m.
|
Burnaby |
The objectives of this course are to cover the modelling and analysis of continuous and discrete signals using linear techniques. Topics covered include: a review of Laplace transforms; methods for the basic modelling of physical systems; discrete and continuous convolution; impulse and step response; transfer functions and filtering; the continuous Fourier transform and its relationship to the Laplace transform; frequency response and Bode plots; sampling; the Z-transform. Prerequisite: ENSC 180, ENSC 220 (or MSE 250) and (MATH 260 or MATH 310), all with a minimum grade of C-. Students with credit for MSE 280 or SEE 341 may not take ENSC 380 for further credit.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Kamal Gupta |
Sep 4 – Oct 11, 2024: Tue, Thu, 2:30–4:20 p.m.
Oct 16 – Dec 3, 2024: Tue, Thu, 2:30–4:20 p.m. |
Burnaby Burnaby |
This course is an introduction to the analysis, design, and applications of continuous time linear control systems. Topics include transfer function representation of open and closed loop systems, time domain specifications and steady state error, sensitivity analysis, time and frequency response, and stability criteria. It includes a treatment of methods for the analysis of control systems based on the root locus, Bode plots and Nyquist criterion, and their use in the design of PID, and lead-lag compensation. Lab work is included in this course. Prerequisite: ENSC 380 (or MSE 280), with a minimum grade of C-. Students with credit for MSE 381 or SEE 342 may not take ENSC 383 for further credit.
This is the first course in a group-based, two-course capstone sequence: ENSC 405W, ENSC 440. Topics include group writing processes, project documentation and engineering design, group dynamics, engineering standards, project management, dispute resolution, intellectual property, entrepreneurship, and user interface design. These groups will be maintained for the completion of the capstone project in ENSC 440. Students must take ENSC 440 in the term directly following successful completion of ENSC 405W. Prerequisite: (ENSC 105W or MSE 101W), ENSC 204, all with a minimum grade of C-, completion of a minimum of 22 units of required upper division ENSC courses, and completion of (or concurrent enrollment in) two upper division technical electives meeting the requirements of the program. Students are required to complete at least two co-ops before enrolling in ENSC 440 Capstone B. Capstone B must be taken in the term immediately following Capstone A. Enrollment into Capstone A is by approval of the department via Capstone application form. Engineering Science students cannot take MSE 410, MSE 411, SEE 410W or SEE 411 for credit. Students who have taken (ENSC 304 and ENSC 305W) may not take ENSC 405W for credit. Writing.
This course provides an introduction to the engineering profession, professional practice, engineering law and ethics, including the issues of worker and public safety. It also offers opportunities to explore the social implications and environmental impacts of technologies, including sustainability, and to consider engineers' responsibility to society. Prerequisite: 100 units including one of ENSC 100, ENSC 106, CMPT 106, or MSE 102, with a minimum grade of C-. Students with credit for MSE 402 or SEE 402 may not take ENSC 406 for further credit.
This course covers the business, management and entrepreneurial concepts that are important to engineers who manage projects, run businesses, or need to decide on the most efficient method for accomplishing a task. The topics to be covered include: financial accounting, rates of return, taxes, cost-benefit analyses, marketing, financing methods, and business plans. Prerequisite: A minimum of 80 units is required to enroll in this course. Students with credit for ENSC 201 or ENSC 411 cannot complete this course for further credit.
This course combines the engineering economics covered in ENSC 201 with a series of guest lectures on entrepreneurship and the writing of a business plan in collaboration with students from the Beedie School of Business. Prerequisite: Students must have completed 90 units and have a GPA above 3.0. Students with credit for ENSC 201 or ENSC 410 cannot complete this course for further credit.
This is the second course in the group-based, two-course capstone sequence: ENSC 405W (Capstone A), and ENSC 440 (Capstone B). The capstone design course is based around a group project that consists of researching, designing, building and testing the hardware implementation of a working system. The course also includes material on how to design for safety and a shop training workshop. In order to obtain credit, students must successfully complete both courses. Students may not take Capstone B and Co-op in the same term. Prerequisite: ENSC 405W with a minimum grade of C-. Students will be automatically enrolled in ENSC 440 in the term immediately following successful completion of ENSC 405W. Students with credit for ENSC 440W, ENSC 442 or MSE 411 or SEE 411 may not take this course for further credit.
Section | Instructor | Day/Time | Location |
---|---|---|---|
E100 |
Andrew Rawicz |
Sep 4 – Dec 3, 2024: Wed, 4:30–6:20 p.m.
|
Burnaby |
Develops signal processing techniques of wide applicability, presented in the context of processing and analysis of digital images, in particular 2D and3D biomedical images. Covers acquisition, formation and representation of digital images, filtering, enhancement and restoration in both spatial and frequency domains, image segmentation, image registration, and discrete image transforms. Prerequisite: ((ENSC 180 and ENSC 251) or CMPT 225) with a minimum grade of C- and a minimum of 80 units. Students with credit for ENSC 460/895-Digital Image Processing and Analysis cannot take this course for further credit.
Instrumentation techniques for measuring common physiological signals. Bioelectric and biochemical sensors. Biostimulation. Electronic design issues: electrical safety, signal conditioning and protection against noise, digital signal acquisition. Live subject ethical considerations. Laboratory work to include use of data acquisition packages in conjunction with various sensors, as well as design and construction of a full signal acquisition chain, from sensor to RAM. Prerequisite: (ENSC 225 or MSE 251), ENSC 320, (ENSC 380 or MSE 280), all with a minimum grade of C- and a minimum of 80 units. ENSC 380/MSE 280 can be taken concurrently. Students with credit for ENSC 372 cannot take this course for further credit.
Basic physics and applications of light-biomatter interactions, tissue optics and microscopy instrumentation. With this background students will embark on practical issues such as light-induced effects in bio-systems, microscopy diagnostic techniques, therapeutic instrumentation and applications, optical tomography and recent developments in optical sensors. Lectures are accompanied by laboratory evaluation projects plus a final design and fabrication project. Prerequisite: Completion of 80 units including PHYS 121 or 102 or 141, with a minimum grade of C-. Recommended: ENSC 376 or 470.
Provides an understanding of the scientific principles, physics and engineering technology that provide the basis for the various techniques (radiography, sonography, computed tomography, magnetic resonance imaging), by which medical images are acquired. Prerequisite: (ENSC 380 or MSE 280) with a minimum grade of C- and a minimum of 80 units. Students with credit for ENSC 374 cannot take this course for further credit.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Balbir Gill |
Sep 4 – Dec 3, 2024: Wed, Fri, 8:30–10:20 a.m.
|
Burnaby |
Supervised study, research and preliminary work leading to a formal proposal for the thesis project work in ENSC 499. This activity can be directly augmented by other course work and by directed study. The locale of the work may be external to the University or within a University laboratory, or may bridge the two locations. Supervision may be by technical personnel at an external organization, or by faculty members, or through some combination. At least one of the supervisors must be a registered professional engineer. A plan for the student's ENSC 498 activities must be submitted to the school at the time of enrolment in the course. Completion of the undergraduate thesis project proposal is the formal requirement of this course and the basis upon which it is graded. Grading will be on a pass/fail basis. Prerequisite: At least 115 units or permission of the academic supervisor.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 | TBD |
A thesis is based on the research or development project that incorporates a significant level of engineering design. This work is typically undertaken in the student's final year, but in no case before the student has completed 115 units. Registration for ENSC 499 takes place in the term in which the thesis will be presented and defended. The locale of the work, supervision and other arrangements follow those for ENSC 498. Grading of the thesis will be on a pass/fail basis, but recognition will be given to outstanding work. Prerequisite: ENSC 498 with a minimum grade of P.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 | TBD |
Designed for students specializing in mathematics, physics, chemistry, computing science and engineering. Logarithmic and exponential functions, trigonometric functions, inverse functions. Limits, continuity, and derivatives. Techniques of differentiation, including logarithmic and implicit differentiation. The Mean Value Theorem. Applications of differentiation including extrema, curve sketching, Newton's method. Introduction to modeling with differential equations. Polar coordinates, parametric curves. Prerequisite: Pre-Calculus 12 (or equivalent) with a grade of at least A, or MATH 100 with a grade of at least B, or achieving a satisfactory grade on the Simon Fraser University Calculus Readiness Test. Students with credit for either MATH 150, 154 or 157 may not take MATH 151 for further credit. Quantitative.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Jamie Mulholland |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m. |
Burnaby Burnaby |
D200 |
MacKenzie Carr |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m. |
Burnaby Burnaby |
D400 |
Natalia Kouzniak |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 9:30–10:20 a.m.
Oct 15, 2024: Tue, 9:30–10:20 a.m. |
Surrey Surrey |
OP01 | TBD | ||
OP04 | TBD |
Riemann sum, Fundamental Theorem of Calculus, definite, indefinite and improper integrals, approximate integration, integration techniques, applications of integration. First-order separable differential equations and growth models. Sequences and series, series tests, power series, convergence and applications of power series. Prerequisite: MATH 150 or 151, with a minimum grade of C-; or MATH 154 or 157 with a grade of at least B. Students with credit for MATH 155 or 158 may not take this course for further credit. Quantitative.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Lyn Ge |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m. |
Burnaby Burnaby |
OP01 | TBD |
Linear equations, matrices, determinants. Introduction to vector spaces and linear transformations and bases. Complex numbers. Eigenvalues and eigenvectors; diagonalization. Inner products and orthogonality; least squares problems. An emphasis on applications involving matrix and vector calculations. Prerequisite: MATH 150 or 151 or MACM 101, with a minimum grade of C-; or MATH 154 or 157, both with a grade of at least B. Students with credit for MATH 240 may not take this course for further credit. Quantitative.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Saieed Akbari Feyzaabaadi |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 11:30 a.m.–12:20 p.m.
Oct 15, 2024: Tue, 11:30 a.m.–12:20 p.m. |
Burnaby Burnaby |
D400 |
Vijaykumar Singh |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 1:30–2:20 p.m.
Oct 15, 2024: Tue, 1:30–2:20 p.m. |
Surrey Surrey |
OP01 | TBD | ||
OP02 |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 1:30–2:20 p.m.
|
|
Rectangular, cylindrical and spherical coordinates. Vectors, lines, planes, cylinders, quadric surfaces. Vector functions, curves, motion in space. Differential and integral calculus of several variables. Vector fields, line integrals, fundamental theorem for line integrals, Green's theorem. Prerequisite: MATH 152 with a minimum grade of C-; or MATH 155 or MATH 158 with a grade of at least B. Recommended: It is recommended that MATH 240 or 232 be taken before or concurrently with MATH 251. Quantitative.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Weiran Sun Weiran Sun |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m. |
Burnaby Burnaby |
D200 |
Justin Gray |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m. |
Burnaby Burnaby |
D400 |
Justin Chan |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m. |
Surrey Surrey |
OP01 | TBD | ||
OP02 | TBD |
Designed for students in the Engineering Science program. Combines a continuation of the study of vector calculus from MATH 251 with an introduction to functions of a complex variable. Vector functions of a single variable, space curves, scalar and vector fields, conservative fields, surface and volume integrals, and theorems of Gauss, Green and Stokes. Functions of a complex variable, differentiability, contour integrals, Cauchy's theorem. Taylor and Laurent expansion, method of residues, integral transform and conformal mapping. Prerequisite: MATH 240 or 232, and 251, all with a minimum grade of C-. MATH 240 or 232 may be taken concurrently. Students with credit for MATH 322 or MATH 252 may not take this course for further credit. Quantitative.
First-order differential equations, second- and higher-order linear equations, series solutions, introduction to Laplace transform, systems and numerical methods, applications in the physical, biological and social sciences. Prerequisite: MATH 152 with a minimum grade of C-; or MATH 155 or 158, with a grade of at least B; MATH 232 or 240, with a minimum grade of C-. Students with credit for MATH 310 may not take this course for further credit. Quantitative.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Ahmad Mokhtar |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 10:30–11:20 a.m.
Oct 15, 2024: Tue, 10:30–11:20 a.m. |
Burnaby Burnaby |
D101 |
Sep 4 – Dec 3, 2024: Mon, 4:30–5:20 p.m.
Oct 15, 2024: Tue, 4:30–5:20 p.m. |
Burnaby Burnaby |
|
D103 |
Sep 4 – Oct 11, 2024: Tue, 9:30–10:20 a.m.
Oct 16 – Dec 3, 2024: Tue, 9:30–10:20 a.m. |
Burnaby Burnaby |
|
D104 |
Sep 4 – Oct 11, 2024: Tue, 10:30–11:20 a.m.
Oct 16 – Dec 3, 2024: Tue, 10:30–11:20 a.m. |
Burnaby Burnaby |
|
D105 |
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–12:20 p.m. |
Burnaby Burnaby |
|
D400 |
Justin Chan |
Sep 4 – Dec 3, 2024: Mon, Wed, 10:30–11:20 a.m.
Oct 15, 2024: Tue, 10:30–11:20 a.m. Sep 4 – Dec 3, 2024: Fri, 10:30–11:20 a.m. |
Surrey Surrey Surrey |
D401 |
Sep 4 – Dec 3, 2024: Wed, 2:30–3:20 p.m.
|
Surrey |
|
D402 |
Sep 4 – Dec 3, 2024: Wed, 3:30–4:20 p.m.
|
Surrey |
|
D403 |
Sep 4 – Dec 3, 2024: Wed, 4:30–5:20 p.m.
|
Surrey |
A general calculus-based introduction to mechanics. Topics include translational and rotational motion, momentum, energy, gravitation, and selected topics in modern physics. Prerequisite: BC Principles of Physics 12 or PHYS 100 or equivalent, with a minimum grade of C-. This prerequisite may be waived, at the discretion of the department, as determined by the student's performance on a regularly scheduled PHYS 100 final exam. Please consult the physics advisor for further details. Corequisite: MATH 150 or 151 or 154. Recommended Corequisite: PHYS 132. Students with credit for PHYS 101, 125 or 140 may not take this course for further credit. Quantitative/Breadth-Science.
Section | Instructor | Day/Time | Location |
---|---|---|---|
D100 |
Daniel Higginbottom Sarah Johnson |
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 9:30–10:20 a.m.
Oct 15, 2024: Tue, 9:30–10:20 a.m. |
Burnaby Burnaby |
D101 |
Sep 4 – Oct 11, 2024: Tue, 9:30–10:20 a.m.
Oct 16 – Dec 3, 2024: Tue, 9:30–10:20 a.m. |
Burnaby Burnaby |
|
D102 |
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–12:20 p.m. |
Burnaby Burnaby |
|
D103 |
Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m. |
Burnaby Burnaby |
|
D104 |
Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m. |
Burnaby Burnaby |
|
D105 |
Sep 4 – Oct 11, 2024: Tue, 2:30–3:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–3:20 p.m. |
Burnaby Burnaby |
|
D107 |
Sep 4 – Oct 11, 2024: Tue, 4:30–5:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 4:30–5:20 p.m. |
Burnaby Burnaby |
|
D108 |
Sep 4 – Oct 11, 2024: Tue, 5:30–6:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 5:30–6:20 p.m. |
Burnaby Burnaby |
|
D109 |
Sep 4 – Dec 3, 2024: Wed, 10:30–11:20 a.m.
|
Burnaby |
|
D110 |
Sep 4 – Dec 3, 2024: Wed, 11:30 a.m.–12:20 p.m.
|
Burnaby |
|
D111 |
Sep 4 – Dec 3, 2024: Wed, 12:30–1:20 p.m.
|
Burnaby |
|
D112 |
Sep 4 – Dec 3, 2024: Wed, 1:30–2:20 p.m.
|
Burnaby |
|
D113 |
Sep 4 – Dec 3, 2024: Wed, 2:30–3:20 p.m.
|
Burnaby |
|
D116 |
Sep 4 – Dec 3, 2024: Thu, 11:30 a.m.–12:20 p.m.
|
Burnaby |
|
D117 |
Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
|
Burnaby |
|
D118 |
Sep 4 – Dec 3, 2024: Thu, 1:30–2:20 p.m.
|
Burnaby |
A general calculus-based introduction to electricity, magnetism and optics. Topics include electricity, magnetism, simple circuits, optics and topics from applied physics. Prerequisite: PHYS 120 or 125 or 140, with a minimum grade of C-, or PHYS 101 with a minimum grade of B. Corequisite: MATH 152 or 155. Recommended Corequisite: PHYS 133. Students with credit for PHYS 102, 126 or 141 may not take this course for further credit. Quantitative/Breadth-Science.
** or MATH 150 Calculus I with Review if you do not meet the MATH 151 prerequisites
Elective Course Requirements
Complementary Studies Elective Courses
In addition, students must also complete one complementary studies course chosen from the complementary studies list that is available at http://www.sfu.ca/engineering/current-students/undergraduate-students/requirements-and-policies/electives.html. Note that students must complete an acceptable Breadth-Humanities course and should choose this elective course with that in mind. A pre-approved complementary studies course list is available at http://www.sfu.ca/engineering/current-students/undergraduate-students/requirements-and-policies/electives.html. Other courses may be acceptable with undergraduate curriculum committee chair approval.
Engineering Science and Design Electives
Engineering Science and Design (ESD) Electives may be offered by departments other than the School of Engineering Science, but they must satisfy the Canadian Engineering Accreditation Board (CEAB) engineering science and engineering design requirements. Generally, engineering science has roots in mathematics and basic sciences, but carries knowledge further toward creative applications that could include simulation, experimental procedures, modelling and the development of mathematical or numerical techniques. Application to the identification and solution of practical engineering problems is stressed.
Engineering Design requires students to demonstrate an ability to design solutions for complex, open-ended engineering problems and to design systems, components or processes that meet specified needs with appropriate attention to health and safety risks, applicable standards and economic, environmental, cultural and societal considerations.
Each option has a pre-approved list of electives that may include one or more pre-approved ESD electives. Note that these courses may have prerequisites not required for your option; these prerequisites would still need to be taken in order to enroll in the elective. Students interested in taking an ESD elective course that does not appear on this list should contact the Chair of their option/Undergraduate Curriculum Committee and obtain his/her approval in writing before proceeding with the course.
Students in the biomedical engineering option must complete a minimum of eight units from the engineering science & design elective course list available at http://www.sfu.ca/engineering/current-students/undergraduate-students/programs-and-requirements/biomedical-engineering/curriculum-revised.html.
NOTE: SFU students accepted in the accelerated master’s within the School of Engineering Science may apply a maximum of 10 graduate course units, taken while completing the bachelor's degree, towards the upper division electives of the bachelor's program and the requirements of the master's degree. For more information go to: https://www.sfu.ca/gradstudies/apply/programs/accelerated-masters.html or please contact the Engineering Science Graduate Program Committee Chair.
Thesis
Students will start their thesis work (ENSC 498 and 499) on or off campus, either integrated with an optional (or mandatory) work term or as independent work with appropriate supervision.
Writing, Quantitative, and Breadth Requirements
Students admitted to Simon Fraser University beginning in the fall 2006 term must meet writing, quantitative and breadth requirements as part of any degree program they may undertake. See Writing, Quantitative, and Breadth Requirements for university-wide information.
WQB Graduation Requirements
A grade of C- or better is required to earn W, Q or B credit
Requirement |
Units |
Notes | |
W - Writing |
6 |
Must include at least one upper division course, taken at Simon Fraser University within the student's major subject; two courses (minimum three units each) |
|
Q - Quantitative |
6 |
Q courses may be lower or upper division; two courses (total six units or more) | |
B - Breadth |
18 |
Designated Breadth |
Must be outside the student's major subject, and may be lower or upper division: Two courses (total six units or more) Social Sciences: B-Soc |
6 |
Additional Breadth |
Two courses (total six units or more) outside the student's major subject (may or may not be B-designated courses, and will likely help fulfil individual degree program requirements). Students choosing to complete a joint major, joint honours, double major, two extended minors, an extended minor and a minor, or two minors may satisfy the breadth requirements (designated or not designated) with courses completed in either one or both program areas. |
WQB Requirement Modifications for Engineering Science Students
For engineering science students, these university requirements are modified as follows.
- for students in the biomedical engineering option, the total number of Breadth Social Sciences (B-Soc) and Breadth Humanities (B-Hum) courses is reduced to two courses, with at least one course in each category.
In addition, the Canadian Engineering Accreditation Board (CEAB) requires that one complementary studies elective in the ENSC curriculum must be in the Central Issue, Methodology, and Thought Process category.
Residency Requirements and Transfer Credit
- At least half of the program's total units must be earned through Simon Fraser University study.
- At least two thirds of the program's total upper division units must be earned through Simon Fraser University study.
Please see Faculty of Applied Sciences Residency Requirements for further information.
Elective Courses
In addition to the courses listed above, students should consult an academic advisor to plan the remaining required elective courses.