Please note:

To view the Summer 2024 Academic Calendar, go to www.sfu.ca/students/calendar/2024/summer.html.

Mechatronic Systems Engineering and Business Double Degree Program Major

Bachelor of Applied Science and Bachelor of Business Administration

This double-degree major program leads to a bachelor of applied science degree and a bachelor of business administration degree.

Admission Requirements

MSE majors may gain admission by meeting the competitive requirements for entry into the Beedie School of Business. Beedie business students may gain admission by meeting the internal transfer requirements of the mechatronic systems engineering major.

Co-operative Education Work Experience

This double degree program requires the completion of a minimum of three mandatory engineering co-operative education work terms (MSE 293/294, MSE 393/394, and MSE 493/494*). Dual-degree students may also take up to two additional co-op terms in business (BUS 225, 325, 326, 327, 328). These additional co-op terms will NOT count towards the three mandatory engineering co-op terms.

* For the agricultural technology (AgriTech) concentration, at least two of the co-op work terms must be on AgriTech-based placements.

Minimum Grade Requirements

A minimum grade of C- is required in all courses that are used to fulfil mechatronic systems engineering program requirements.

In addition to normal university grade point average requirements, the Beedie School of Business requires a minimum 2.30 overall SFU Business course grade point average for entry into all 300 and 400 division business courses.

A minimum 2.30 overall SFU Business course grade point average is required for graduation from a business major, joint major, or double degree program.

For a course to be accepted as fulfilling a prerequisite, or for a lower division requirement, or for a core course to be accepted in a student's program in business, a student must have obtained a minimum grade of C- (C minus).

Program Requirements

Students complete all of

BUS 232 - Business Statistics (3)

An introduction to business statistics (descriptive and inferential statistics) with a heavy emphasis on applications and the use of EXCEL. Students will be required to use statistical applications to solve business problems. Corequisite: MATH 150, MATH 151, MATH 154, or MATH 157, with a minimum grade of C-; 15 units. Students with credit for BUEC 232 or ECON 233 may not take this course for further credit. Quantitative.

Section Instructor Day/Time Location
D100 Negar Ganjouhaghighi
Sep 4 – Oct 11, 2024: Tue, 2:30–5:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–5:20 p.m.
Burnaby
Burnaby
D200 Cleusa Yamamoto
Sep 4 – Dec 3, 2024: Wed, 2:30–5:20 p.m.
Surrey
E100 Negar Ganjouhaghighi
Sep 4 – Dec 3, 2024: Thu, 5:30–8:20 p.m.
Burnaby
OP01 Sep 4 – Oct 11, 2024: Tue, 9:30 a.m.–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 9:30 a.m.–2:20 p.m.
Burnaby
Burnaby
OP02 Sep 4 – Dec 3, 2024: Wed, 9:30 a.m.–2:20 p.m.
Burnaby
OP03 Sep 4 – Dec 3, 2024: Wed, 2:30–6:20 p.m.
Burnaby
OP04 Sep 4 – Dec 3, 2024: Wed, 10:30 a.m.–12:20 p.m.
Surrey
OP05 Sep 4 – Dec 3, 2024: Wed, 12:30–2:20 p.m.
Surrey
OP06 Sep 4 – Dec 3, 2024: Thu, 9:30 a.m.–3:20 p.m.
Burnaby
BUS 251 - Financial Accounting I (3)

An introduction to financial accounting, including accounting terminology, understanding financial statements, analysis of a business entity using financial statements. Includes also time value of money and a critical review of the conventional accounting system. Prerequisite: 12 units. Quantitative.

Section Instructor Day/Time Location
D100 Richard Wong
Sep 4 – Oct 11, 2024: Tue, 12:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–2:20 p.m.
Burnaby
Burnaby
D101 Sep 4 – Oct 11, 2024: Tue, 2:30–3:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D102 Sep 4 – Oct 11, 2024: Tue, 2:30–3:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D103 Sep 4 – Oct 11, 2024: Tue, 2:30–3:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D104 Sep 4 – Oct 11, 2024: Tue, 3:30–4:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 3:30–4:20 p.m.
Burnaby
Burnaby
D105 Sep 4 – Oct 11, 2024: Tue, 3:30–4:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 3:30–4:20 p.m.
Burnaby
Burnaby
D106 Sep 4 – Oct 11, 2024: Tue, 3:30–4:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 3:30–4:20 p.m.
Burnaby
Burnaby
D107 Sep 4 – Oct 11, 2024: Tue, 4:30–5:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 4:30–5:20 p.m.
Burnaby
Burnaby
D108 Sep 4 – Oct 11, 2024: Tue, 4:30–5:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 4:30–5:20 p.m.
Burnaby
Burnaby
D200 Praise Ma
Sep 4 – Dec 3, 2024: Thu, 10:30 a.m.–12:20 p.m.
Surrey
D201 Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
Surrey
D202 Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
Surrey
D203 Sep 4 – Dec 3, 2024: Thu, 1:30–2:20 p.m.
Surrey
E100 Richard Wong
Sep 4 – Oct 11, 2024: Tue, 5:30–7:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 5:30–7:20 p.m.
Burnaby
Burnaby
E101 Sep 4 – Oct 11, 2024: Tue, 7:30–8:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 7:30–8:20 p.m.
Burnaby
Burnaby
E102 Sep 4 – Oct 11, 2024: Tue, 7:30–8:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 7:30–8:20 p.m.
Burnaby
Burnaby
E103 Sep 4 – Oct 11, 2024: Tue, 7:30–8:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 7:30–8:20 p.m.
Burnaby
Burnaby
E104 Sep 4 – Oct 11, 2024: Tue, 7:30–8:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 7:30–8:20 p.m.
Burnaby
Burnaby
E105 Sep 4 – Oct 11, 2024: Tue, 8:30–9:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 8:30–9:20 p.m.
Burnaby
Burnaby
E106 Sep 4 – Oct 11, 2024: Tue, 8:30–9:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 8:30–9:20 p.m.
Burnaby
Burnaby
E107 Sep 4 – Oct 11, 2024: Tue, 8:30–9:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 8:30–9:20 p.m.
Burnaby
Burnaby
E108 Sep 4 – Oct 11, 2024: Tue, 8:30–9:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 8:30–9:20 p.m.
Burnaby
Burnaby
BUS 254 - Managerial Accounting I (3)

Theory and methods of cost compilation for managerial planning, control and decision making; the use of budgets and analysis in planning and controlling operations, establishing supervisory and departmental responsibility, and various techniques of measuring results. Prerequisite: BUS 251 with a minimum grade of C-; 15 units. Quantitative.

Section Instructor Day/Time Location
D100 Kwai Man Teresa Fung
Sep 4 – Oct 11, 2024: Tue, 10:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 10:30 a.m.–12:20 p.m.
Burnaby
Burnaby
D101 Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m.
Burnaby
Burnaby
D102 Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m.
Burnaby
Burnaby
D103 Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m.
Burnaby
Burnaby
D104 Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m.
Burnaby
Burnaby
D105 Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m.
Burnaby
Burnaby
D106 Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m.
Burnaby
Burnaby
D107 Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m.
Burnaby
Burnaby
D200 Kwai Man Teresa Fung
Sep 4 – Dec 3, 2024: Thu, 10:30 a.m.–12:20 p.m.
Surrey
D201 Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
Surrey
D202 Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
Surrey
D203 Sep 4 – Dec 3, 2024: Thu, 1:30–2:20 p.m.
Surrey
E100 Kwai Man Teresa Fung
Sep 4 – Oct 11, 2024: Tue, 5:30–7:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 5:30–7:20 p.m.
Burnaby
Burnaby
E101 Sep 4 – Oct 11, 2024: Tue, 4:30–5:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 4:30–5:20 p.m.
Burnaby
Burnaby
E102 Sep 4 – Oct 11, 2024: Tue, 4:30–5:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 4:30–5:20 p.m.
Burnaby
Burnaby
E103 Sep 4 – Oct 11, 2024: Tue, 4:30–5:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 4:30–5:20 p.m.
Burnaby
Burnaby
E104 Sep 4 – Oct 11, 2024: Tue, 7:30–8:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 7:30–8:20 p.m.
Burnaby
Burnaby
E105 Sep 4 – Oct 11, 2024: Tue, 7:30–8:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 7:30–8:20 p.m.
Burnaby
Burnaby
E106 Sep 4 – Oct 11, 2024: Tue, 7:30–8:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 7:30–8:20 p.m.
Burnaby
Burnaby
BUS 272 - Behaviour in Organizations (3)

Theories, concepts and issues in the field of organizational behaviour with an emphasis on individual and team processes. Core topics include employee motivation and performance, stress management, communication, work perceptions and attitudes, decision-making, team dynamics, employee involvement and conflict management. Prerequisite: 12 units.

Section Instructor Day/Time Location
D100 Bahareh Assadi
Sep 4 – Dec 3, 2024: Mon, 12:30–2:20 p.m.
Oct 15, 2024: Tue, 12:30–2:20 p.m.
Burnaby
Burnaby
D101 Sep 4 – Dec 3, 2024: Mon, 2:30–3:20 p.m.
Oct 15, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D102 Sep 4 – Dec 3, 2024: Mon, 2:30–3:20 p.m.
Oct 15, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D103 Sep 4 – Dec 3, 2024: Mon, 2:30–3:20 p.m.
Oct 15, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D104 Sep 4 – Dec 3, 2024: Mon, 3:30–4:20 p.m.
Oct 15, 2024: Tue, 3:30–4:20 p.m.
Burnaby
Burnaby
D105 Sep 4 – Dec 3, 2024: Mon, 3:30–4:20 p.m.
Oct 15, 2024: Tue, 3:30–4:20 p.m.
Burnaby
Burnaby
D106 Sep 4 – Dec 3, 2024: Mon, 3:30–4:20 p.m.
Oct 15, 2024: Tue, 3:30–4:20 p.m.
Burnaby
Burnaby
D107 Sep 4 – Dec 3, 2024: Mon, 4:30–5:20 p.m.
Oct 15, 2024: Tue, 4:30–5:20 p.m.
Burnaby
Burnaby
D200 Sam Thiara
Sep 4 – Oct 11, 2024: Tue, 10:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 10:30 a.m.–12:20 p.m.
Surrey
Surrey
D201 Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m.
Surrey
Surrey
D202 Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m.
Surrey
Surrey
D203 Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m.
Surrey
Surrey
D204 Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m.
Surrey
Surrey
E100 Melissa McCrae
Sep 4 – Dec 3, 2024: Mon, 5:30–7:20 p.m.
Oct 15, 2024: Tue, 5:30–7:20 p.m.
Burnaby
Burnaby
E101 Sep 4 – Dec 3, 2024: Mon, 4:30–5:20 p.m.
Oct 15, 2024: Tue, 4:30–5:20 p.m.
Burnaby
Burnaby
E102 Sep 4 – Dec 3, 2024: Mon, 4:30–5:20 p.m.
Oct 15, 2024: Tue, 4:30–5:20 p.m.
Burnaby
Burnaby
E103 Sep 4 – Dec 3, 2024: Mon, 4:30–5:20 p.m.
Oct 15, 2024: Tue, 4:30–5:20 p.m.
Burnaby
Burnaby
E104 Sep 4 – Dec 3, 2024: Mon, 7:30–8:20 p.m.
Oct 15, 2024: Tue, 7:30–8:20 p.m.
Burnaby
Burnaby
E105 Sep 4 – Dec 3, 2024: Mon, 7:30–8:20 p.m.
Oct 15, 2024: Tue, 7:30–8:20 p.m.
Burnaby
Burnaby
E106 Sep 4 – Dec 3, 2024: Mon, 7:30–8:20 p.m.
Oct 15, 2024: Tue, 7:30–8:20 p.m.
Burnaby
Burnaby
BUS 312 - Introduction to Finance (3)

Role and function of financial managers, financial analysis, compound interest valuation and capital budgeting, management of current assets, introduction to financial instruments and institutions. Prerequisite: BUS 254 with a minimum grade of C- and 45 units. OR actuarial science students with BUS 254 with a minimum grade of C- and 45 units. Recommended: BUS 207 or ECON 201. Quantitative.

Section Instructor Day/Time Location
D100 Gherardo Gennaro Caracciolo
Sep 4 – Dec 3, 2024: Thu, 11:30 a.m.–2:20 p.m.
Burnaby
D200 Gherardo Gennaro Caracciolo
Sep 4 – Oct 11, 2024: Tue, 2:30–5:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–5:20 p.m.
Surrey
Surrey
E100 Gherardo Gennaro Caracciolo
Sep 4 – Dec 3, 2024: Thu, 5:30–8:20 p.m.
Burnaby
BUS 343 - Introduction to Marketing (3)

The environment of marketing; relation of social sciences to marketing; evaluation of marketing theory and research; assessment of demand, consumer behaviour analysis; market institutions; method and mechanics of distribution in domestic, foreign and overseas markets; sales organization; advertising; new product development, publicity and promotion; marketing programs. Prerequisite: 45 units.

Section Instructor Day/Time Location
D100 Claudia Gomez Borquez
Sep 4 – Dec 3, 2024: Thu, 10:30 a.m.–12:20 p.m.
Burnaby
D101 Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
Burnaby
D102 Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
Burnaby
D103 Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
Burnaby
D104 Sep 4 – Dec 3, 2024: Thu, 1:30–2:20 p.m.
Burnaby
D105 Sep 4 – Dec 3, 2024: Thu, 1:30–2:20 p.m.
Burnaby
D106 Sep 4 – Dec 3, 2024: Thu, 1:30–2:20 p.m.
Burnaby
D107 Sep 4 – Dec 3, 2024: Thu, 2:30–3:20 p.m.
Burnaby
D108 Sep 4 – Dec 3, 2024: Thu, 2:30–3:20 p.m.
Burnaby
D109 Sep 4 – Dec 3, 2024: Thu, 2:30–3:20 p.m.
Burnaby
D110 Sep 4 – Dec 3, 2024: Thu, 3:30–4:20 p.m.
Burnaby
D111 Sep 4 – Dec 3, 2024: Thu, 3:30–4:20 p.m.
Burnaby
D200 Claudia Gomez Borquez
Sep 4 – Oct 11, 2024: Tue, 10:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 10:30 a.m.–12:20 p.m.
Surrey
Surrey
D201 Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m.
Surrey
Surrey
D202 Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m.
Surrey
Surrey
D203 Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m.
Surrey
Surrey
D204 Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m.
Surrey
Surrey
D205 Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m.
Surrey
Surrey
BUS 360W - Business Communication (4)

Helps students develop professional writing- and speaking-based communication strategies they can confidently adapt to a wide range of business situations. The course aims to raise their communication performance to a professionally acceptable level, rather than to memorize or theorize about communication knowledge: this is a “learn-by-doing” course. Students will improve their ability to conceptualize, analyze/evaluate, synthesize, and apply information to guide their thinking and finished products across various business contexts. As teamwork is a fundamental skill valued by employers, students will participate in a major team project to learn about and apply best practices for collaboration with respect to professional business communication. The primary means of instruction and learning is guided practice in both writing and presenting in response to realistic business contexts. Instruction and assessment focus on both the process of creating professional, finished products, as well as the quality of those products. Prerequisite: This course is open to students admitted prior to Fall 2014 to the business administration major, honours, or second degree program and who have 45 units, OR to students admitted Fall 2014 - Summer 2017 to the business administration major, honours, or second degree program and who have 45 units and BUS 130 or (BUS 201 or BUS 202) or BUS 301, with a minimum grade of C-, OR to students admitted Fall 2017 – Summer 2022 to the business administration major, honours, or second degree program and who have 45 units and BUS 130 or (BUS 201 or BUS 202) or BUS 301, and BUS 217W, both with a minimum grade of C-, OR to students admitted Fall 2022 onwards to the business administration major, honours, or second degree program, and who have 45 units; BUS 217W and (BUS 201 or BUS 202), both with a minimum grade of C-; and Corequisite: BUS 300, OR to business administration joint major or joint honours students with BUS 217W with a minimum grade of C- and 45 units, OR to business and economics joint major students with ECON 220W with a minimum grade of C- and 45 units, OR to mechatronic systems engineering and business administration double degree students with 45 units, OR to management systems science or actuarial science majors with 45 units OR to data science major with BUS 217W with a minimum grade of C- and 45 units. Students who have taken BUS 360 may not take this course for further credit. Writing.

Section Instructor Day/Time Location
D200 Christian Venhuizen
Sep 4 – Dec 3, 2024: Wed, 2:30–5:20 p.m.
Surrey
D300 Christian Venhuizen
Sep 4 – Dec 3, 2024: Thu, 2:30–5:20 p.m.
Surrey
D400 Leanne Barlow
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–2:20 p.m.
Burnaby
Burnaby
D500 Leanne Barlow
Sep 4 – Dec 3, 2024: Wed, 9:30 a.m.–12:20 p.m.
Burnaby
D700 Kevin Stewart
Sep 4 – Dec 3, 2024: Fri, 9:30 a.m.–12:20 p.m.
Burnaby
E100 Kevin Stewart
Sep 4 – Dec 3, 2024: Wed, 6:30–9:20 p.m.
Burnaby
E200 Kevin Stewart
Sep 4 – Oct 11, 2024: Tue, 6:30–9:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 6:30–9:20 p.m.
Burnaby
Burnaby
E300 Eric Tung
Sep 4 – Dec 3, 2024: Wed, 6:30–9:20 p.m.
Burnaby
E400 Eric Tung
Sep 4 – Dec 3, 2024: Thu, 6:30–9:20 p.m.
Burnaby
BUS 393 - Commercial Law (3)

Common law, equity, and statute law; contracts, agency, and negotiable instruments; partnership and corporation law; international commercial law. Prerequisite: 45 units.

Section Instructor Day/Time Location
D100 Shafik Bhalloo
Sep 4 – Dec 3, 2024: Mon, 12:30–2:20 p.m.
Oct 15, 2024: Tue, 12:30–2:20 p.m.
Burnaby
Burnaby
D101 Sep 4 – Dec 3, 2024: Mon, 2:30–3:20 p.m.
Oct 15, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D102 Sep 4 – Dec 3, 2024: Mon, 2:30–3:20 p.m.
Oct 15, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D103 Sep 4 – Dec 3, 2024: Mon, 3:30–4:20 p.m.
Oct 15, 2024: Tue, 3:30–4:20 p.m.
Burnaby
Burnaby
D104 Sep 4 – Dec 3, 2024: Mon, 3:30–4:20 p.m.
Oct 15, 2024: Tue, 3:30–4:20 p.m.
Burnaby
Burnaby
D200 James Pflanz
Sep 4 – Dec 3, 2024: Thu, 10:30 a.m.–12:20 p.m.
Surrey
D201 Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
Surrey
D202 Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
Surrey
D203 Sep 4 – Dec 3, 2024: Thu, 1:30–2:20 p.m.
Surrey
D300 Shafik Bhalloo
Sep 4 – Dec 3, 2024: Fri, 12:30–2:20 p.m.
Burnaby
D301 Sep 4 – Dec 3, 2024: Fri, 2:30–3:20 p.m.
Burnaby
D302 Sep 4 – Dec 3, 2024: Fri, 2:30–3:20 p.m.
Burnaby
D303 Sep 4 – Dec 3, 2024: Fri, 3:30–4:20 p.m.
Burnaby
D304 Sep 4 – Dec 3, 2024: Fri, 3:30–4:20 p.m.
Burnaby
D400 Jordan Jutras
Sep 4 – Oct 11, 2024: Tue, 12:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–2:20 p.m.
Burnaby
Burnaby
D401 Sep 4 – Oct 11, 2024: Tue, 2:30–3:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D402 Sep 4 – Oct 11, 2024: Tue, 2:30–3:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D403 Sep 4 – Oct 11, 2024: Tue, 3:30–4:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 3:30–4:20 p.m.
Burnaby
Burnaby
D404 Sep 4 – Oct 11, 2024: Tue, 3:30–4:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 3:30–4:20 p.m.
Burnaby
Burnaby
E100 James Pflanz
Sep 4 – Dec 3, 2024: Thu, 4:30–6:20 p.m.
Burnaby
E101 Sep 4 – Dec 3, 2024: Thu, 6:30–7:20 p.m.
Burnaby
E102 Sep 4 – Dec 3, 2024: Thu, 6:30–7:20 p.m.
Burnaby
E103 Sep 4 – Dec 3, 2024: Thu, 7:30–8:20 p.m.
Burnaby
BUS 478 - Strategy (3) **

Students will demonstrate strategic decision making and critical thinking skills by integrating knowledge and skills acquired in prior course work within the various functional areas of business. Students will conduct rigorous and comprehensive strategic analyses of firms and industries which relate to the strategic fit between internal and external organizational environments, competitive dynamics over an industry’s life cycle, and value creation and competitive advantage through the development of effective corporate and business-level strategies. Prerequisite: BUS 207 (or ECON 201 or ECON 301), BUS 312, 343, 360W and either BUS 374 or 381, all with a minimum grade of C-; 90 units.

Section Instructor Day/Time Location
D100 Jerry Sheppard
Sep 4 – Dec 3, 2024: Thu, 11:30 a.m.–2:20 p.m.
Burnaby
D200 Rui Jorge Basto da Silva
Sep 4 – Dec 3, 2024: Wed, 2:30–5:20 p.m.
Surrey
D300 Edward Bukszar
Sep 4 – Oct 11, 2024: Tue, 2:30–5:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–5:20 p.m.
Burnaby
Burnaby
D400 Jerry Sheppard
Sep 4 – Dec 3, 2024: Mon, 9:30 a.m.–12:20 p.m.
Oct 15, 2024: Tue, 9:30 a.m.–12:20 p.m.
Burnaby
Burnaby
D500 Jerry Sheppard
Sep 4 – Dec 3, 2024: Mon, 2:30–5:20 p.m.
Oct 15, 2024: Tue, 2:30–5:20 p.m.
Burnaby
Burnaby
D600 Yifan Wei
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–2:20 p.m.
Burnaby
Burnaby
D700 Yuri Taira
Sep 4 – Dec 3, 2024: Fri, 9:30 a.m.–12:20 p.m.
Burnaby
E100 Yuri Taira
Sep 4 – Dec 3, 2024: Thu, 5:30–8:20 p.m.
Burnaby
CHEM 120 - General Chemistry I (3)

Atomic and molecular structure; chemical bonding; thermochemistry; elements; periodic table; gases, liquids, solids, and solutions. This course has the same lecture component as CHEM 121 but no laboratory work. Students who intend to take further courses in chemistry should also take CHEM 125 or alternatively take CHEM 121 instead. Prerequisite: Chemistry 12 with a minimum grade of B, or CHEM 110 or 111 with a minimum grade of C-. Students with credit for CHEM 121 or CHEM 123 may not take this course for further credit. Quantitative/Breadth-Science.

Section Instructor Day/Time Location
D400 Rebecca Goyan
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m.
Surrey
Surrey
D401 Sep 4 – Dec 3, 2024: Mon, 11:30 a.m.–12:20 p.m.
Oct 15, 2024: Tue, 11:30 a.m.–12:20 p.m.
Surrey
Surrey
D402 Sep 4 – Dec 3, 2024: Mon, 12:30–1:20 p.m.
Oct 15, 2024: Tue, 12:30–1:20 p.m.
Surrey
Surrey
CMPT 130 - Introduction to Computer Programming I (3)

An introduction to computing science and computer programming, using a systems oriented language, such as C or C++. This course introduces basic computing science concepts. Topics will include: elementary data types, control structures, functions, arrays and strings, fundamental algorithms, computer organization and memory management. Prerequisite: BC Math 12 (or equivalent, or any of MATH 100, 150, 151, 154, or 157, with a minimum grade of C-). Students with credit for CMPT 102, 120, 128 or 166 may not take this course for further credit. Students who have taken CMPT 125, 129 or 135 first may not then take this course for further credit. Quantitative/Breadth-Science.

Section Instructor Day/Time Location
D100 Brian Fraser
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 10:30–11:20 a.m.
Oct 15, 2024: Tue, 10:30–11:20 a.m.
Surrey
Surrey
D101 Brian Fraser
Sep 4 – Dec 3, 2024: Wed, 9:30–10:20 a.m.
Surrey
D102 Brian Fraser
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–12:20 p.m.
Surrey
Surrey
D103 Brian Fraser
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–12:20 p.m.
Surrey
Surrey
D104 Brian Fraser
Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m.
Surrey
Surrey
D105 Brian Fraser
Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m.
Surrey
Surrey
D106 Brian Fraser
Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m.
Surrey
Surrey
D107 Brian Fraser
Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m.
Surrey
Surrey
D108 Brian Fraser
Sep 4 – Oct 11, 2024: Tue, 2:30–3:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–3:20 p.m.
Surrey
Surrey
MATH 151 - Calculus I (3)

Designed for students specializing in mathematics, physics, chemistry, computing science and engineering. Logarithmic and exponential functions, trigonometric functions, inverse functions. Limits, continuity, and derivatives. Techniques of differentiation, including logarithmic and implicit differentiation. The Mean Value Theorem. Applications of differentiation including extrema, curve sketching, Newton's method. Introduction to modeling with differential equations. Polar coordinates, parametric curves. Prerequisite: Pre-Calculus 12 (or equivalent) with a grade of at least A, or MATH 100 with a grade of at least B, or achieving a satisfactory grade on the Simon Fraser University Calculus Readiness Test. Students with credit for either MATH 150, 154 or 157 may not take MATH 151 for further credit. Quantitative.

Section Instructor Day/Time Location
D100 Jamie Mulholland
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m.
Burnaby
Burnaby
D200 MacKenzie Carr
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m.
Burnaby
Burnaby
D400 Natalia Kouzniak
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 9:30–10:20 a.m.
Oct 15, 2024: Tue, 9:30–10:20 a.m.
Surrey
Surrey
OP01 TBD
OP04 TBD
MATH 152 - Calculus II (3)

Riemann sum, Fundamental Theorem of Calculus, definite, indefinite and improper integrals, approximate integration, integration techniques, applications of integration. First-order separable differential equations and growth models. Sequences and series, series tests, power series, convergence and applications of power series. Prerequisite: MATH 150 or 151, with a minimum grade of C-; or MATH 154 or 157 with a grade of at least B. Students with credit for MATH 155 or 158 may not take this course for further credit. Quantitative.

Section Instructor Day/Time Location
D100 Lyn Ge
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m.
Burnaby
Burnaby
OP01 TBD
MATH 232 - Applied Linear Algebra (3)

Linear equations, matrices, determinants. Introduction to vector spaces and linear transformations and bases. Complex numbers. Eigenvalues and eigenvectors; diagonalization. Inner products and orthogonality; least squares problems. An emphasis on applications involving matrix and vector calculations. Prerequisite: MATH 150 or 151 or MACM 101, with a minimum grade of C-; or MATH 154 or 157, both with a grade of at least B. Students with credit for MATH 240 may not take this course for further credit. Quantitative.

Section Instructor Day/Time Location
D100 Saieed Akbari Feyzaabaadi
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 11:30 a.m.–12:20 p.m.
Oct 15, 2024: Tue, 11:30 a.m.–12:20 p.m.
Burnaby
Burnaby
D400 Vijaykumar Singh
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 1:30–2:20 p.m.
Oct 15, 2024: Tue, 1:30–2:20 p.m.
Surrey
Surrey
OP01 TBD
OP02 Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 1:30–2:20 p.m.

MATH 251 - Calculus III (3)

Rectangular, cylindrical and spherical coordinates. Vectors, lines, planes, cylinders, quadric surfaces. Vector functions, curves, motion in space. Differential and integral calculus of several variables. Vector fields, line integrals, fundamental theorem for line integrals, Green's theorem. Prerequisite: MATH 152 with a minimum grade of C-; or MATH 155 or MATH 158 with a grade of at least B. Recommended: It is recommended that MATH 240 or 232 be taken before or concurrently with MATH 251. Quantitative.

Section Instructor Day/Time Location
D100 Weiran Sun
Weiran Sun
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m.
Burnaby
Burnaby
D200 Justin Gray
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m.
Burnaby
Burnaby
D400 Justin Chan
Sep 4 – Dec 3, 2024: Mon, Wed, Fri, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m.
Surrey
Surrey
OP01 TBD
OP02 TBD
MSE 101W - Process, Form, and Convention in Professional Genres (3)

The course teaches fundamentals of informative and persuasive communication for professional engineers and computer scientists in order to assist students in thinking critically about various contemporary technical, social, and ethical issues. It focuses on communicating technical information clearly and concisely, managing issues of persuasion when communicating with diverse audiences, presentation skills, and teamwork. Students with credit for CMPT 105W, SEE 101W, ENSC 102 or ENSC 105W may not take MSE 101W for further credit. Writing.

Section Instructor Day/Time Location
D100 Baher Amouzgar
Sep 4 – Oct 11, 2024: Tue, 2:30–4:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–4:20 p.m.
Sep 4 – Dec 3, 2024: Thu, 2:30–3:20 p.m.
Surrey
Surrey
Surrey
D101 Baher Amouzgar
Sep 4 – Dec 3, 2024: Thu, 3:30–4:20 p.m.
Surrey
MSE 102 - Applied Science, Technology and Society (3)

Reviews the different modes of thought characteristic of science, engineering and computing. Examines the histories and chief current research issues in these fields. Considers the ethical and social responsibilities of engineering and computing work. Students with credit for CMPT 106, ENSC 100 or ENSC 106 may not take MSE 102 for further credit. Breadth-Humanities/Sciences.

MSE 103 - Statics and Dynamics (3)

Force vectors in two- and three-dimensions, equilibrium of a particle in two- and three-dimensions; moments and couples; equilibrium of rigid bodies in two- and three-dimensions. Planar kinematics of particles; planar kinetics of particles; work and energy, impulse, and momentum of particles.

Section Instructor Day/Time Location
D100 Krishna Vijayaraghavan
Sep 4 – Oct 11, 2024: Tue, 8:30–10:20 a.m.
Oct 16 – Dec 3, 2024: Tue, 8:30–10:20 a.m.
Sep 4 – Dec 3, 2024: Thu, 8:30–9:20 a.m.
Surrey
Surrey
Surrey
LAB1 Krishna Vijayaraghavan
Sep 4 – Dec 3, 2024: Fri, 11:30 a.m.–2:20 p.m.
Surrey
LAB2 Krishna Vijayaraghavan
Sep 4 – Dec 3, 2024: Fri, 11:30 a.m.–2:20 p.m.
Surrey
MSE 112 - Mechatronic Design Studio I (3)

An introduction to the field of mechatronics and relevant hands-on experience in designing and programming robotic systems. Through a combination of theory, practical exercises, and project work, students will gain a solid foundation in programming using Python, learn the basics of a microcontroller platform, and develop the skills necessary to build and control simple robots. Topics include sensors, actuators and data acquisition techniques in sensory-based systems. Prerequisite: CMPT 120. Students with credit for MSE 110 may not take this course for further credit.

Section Instructor Day/Time Location
D100 Mohammad Narimani
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–1:20 p.m.
Sep 4 – Dec 3, 2024: Thu, 11:30 a.m.–12:20 p.m.
Surrey
Surrey
Surrey
LAB1 Mohammad Narimani
Sep 4 – Dec 3, 2024: Mon, 11:30 a.m.–2:20 p.m.
Oct 15, 2024: Tue, 11:30 a.m.–2:20 p.m.
Surrey
Surrey
MSE 152 - Digital Computing Fundamentals (3)

Delve into critical topics such as code version control, multi-file project build systems, unit and integration testing, advanced C-programming topics including pointers, data structures, memory management, design patterns, device drivers, and real-world case studies. Prerequisite: CMPT 130.

MSE 210 - Engineering Measurement and Data Analysis (3)

An introduction to methods to collect and analyse engineering data. Topics include the Engineering data representation, Discrete and continuous probability density functions, Engineering measurements, Error analysis, Introduction to sensor interfaces, Introduction to physical sensors, Introduction to sensor signal conditioning, Noise, Test of hypotheses, Linear and nonlinear regression, and Design of experiments. Prerequisite: PHYS 141 or equivalent. MATH 150 or MATH 151. Students with credit for SEE 241 or ENSC 280 may not take MSE 210 for further credit.

MSE 212 - Mechatronic Design Studio II (3)

Design, iterate, prototype and evaluate a 3D static system. This project-based learning design course incorporates computer aided design tools and uses traditional and rapid additive manufacturing. Instrumented prototype is evaluated based on competing project objectives. Introduction to manufacturing systems, at machine shop and industrial scales. Prerequisite: MSE 103 and (MSE 110 or MSE 112).

MSE 220 - Engineering Materials (3)

Materials, their structures, properties and performance; crystal structures and instruments for structure determination; polymers, ceramics, and composites; quality control and reliability. Engineering application of materials. Prerequisite: CHEM 120 or 121. Students with credit for SEE 222, ENSC 231 or ENSC 330 may not take MSE 220 for further credit.

Section Instructor Day/Time Location
D200 Ahad Armin
Sep 4 – Dec 3, 2024: Mon, 4:30–5:20 p.m.
Oct 15, 2024: Tue, 4:30–5:20 p.m.
Sep 4 – Dec 3, 2024: Wed, 4:30–6:20 p.m.
Surrey
Surrey
Surrey
D201 Ahad Armin
Sep 4 – Oct 11, 2024: Tue, 8:30–11:20 a.m.
Oct 16 – Dec 3, 2024: Tue, 8:30–11:20 a.m.
Surrey
Surrey
D202 Ahad Armin
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–2:20 p.m.
Surrey
Surrey
MSE 221 - Statics and Strength of Materials (4)

Covers fundamental concepts of Statics and Strength of Materials. Statics: 2D and 3D force and moment systems. equilibrium of rigid bodies, analysis of structures, distributed forces, centroids and moments of inertia. Strength of Materials: introduction to stress and strain, axial loading, torsion, pure bending, analysis and design of beams for bending and combined loading, deflection of beams, and transformation of stresses. Prerequisite: PHYS 140, MATH 152. Students with credit for SEE 221, ENSC 281 or ENSC 385 may not take this course for further credit.

Section Instructor Day/Time Location
D100 Helen Bailey
Sep 4 – Oct 11, 2024: Tue, 2:30–4:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–4:20 p.m.
Sep 4 – Dec 3, 2024: Thu, 2:30–3:20 p.m.
Surrey
Surrey
Surrey
D101 Helen Bailey
Sep 4 – Dec 3, 2024: Thu, 3:30–4:20 p.m.
Surrey
LAB1 Helen Bailey
Sep 4 – Oct 11, 2024: Tue, 4:30–7:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 4:30–7:20 p.m.
Surrey
Surrey
LAB2 Helen Bailey
Sep 4 – Dec 3, 2024: Thu, 4:30–7:20 p.m.
Surrey
MSE 222 - Kinematics and Dynamics of Rigid Bodies and Mechanisms (4)

Planar and 3D motions kinematics and kinetics of rigid bodies and mechanisms; linkages, gears, cams; synthesis and analysis of mechanisms; consideration of the static and dynamic forces in machines; vibration analysis, response to shock, motion and force transmissibility, vibration isolation. Prerequisite: PHYS 140, MATH 152, and (MATH 260 or MATH 310). Students with credit for ENSC 282 may not take MSE 222 for further credit.

MSE 223 - Introduction to Fluid Mechanics (4)

Physical properties of fluids and fundamental concepts in fluid mechanics. Hydrostatics. Conservation laws for mass, momentum and energy. Flow similarity and dimensional analysis as applied to engineering problems in fluid mechanics. Laminar and turbulent flow. Engineering applications such as flow measurement, flow in pipes and fluid forces on moving bodies. Prerequisite: PHYS 140, MATH 251, and (MATH 260 or MATH 310). Students with credit for ENSC 283 or SEE 225 may not take MSE 223 for further credit.

MSE 250 - Electric Circuits (4)

This course will cover the following topics: fundamental electrical circuit quantities, and circuit elements; circuits laws such as Ohm law, Kirchoff's voltage and current laws, along with series and parallel circuits; operational amplifiers; network theorems; nodal and mesh methods; analysis of natural and step response of first (RC and RL), as well as second order (RLC) circuits; real, reactive and rms power concepts. In addition, the course will discuss the worker safety implications of both electricity and common laboratory practices such as soldering. Prerequisite: PHYS 141 or (PHYS 121 and 131), and MATH 232 and (MATH 260 or MATH 310). (MATH 260 or MATH 310) may be taken concurrently. Students with credit for SEE 230 or ENSC 220 may not take MSE 250 for further credit. Quantitative.

Section Instructor Day/Time Location
D100 Ahmad Rad
Sep 4 – Dec 3, 2024: Mon, 12:30–2:20 p.m.
Oct 15, 2024: Tue, 12:30–2:20 p.m.
Sep 4 – Dec 3, 2024: Wed, 12:30–1:20 p.m.
Surrey
Surrey
Surrey
D101 Ahmad Rad
Sep 4 – Dec 3, 2024: Wed, 1:30–2:20 p.m.
Surrey
LAB1 Ahmad Rad
Sep 4 – Dec 3, 2024: Thu, 9:30 a.m.–12:20 p.m.
Surrey
LAB2 Ahmad Rad
Sep 4 – Dec 3, 2024: Fri, 11:30 a.m.–2:20 p.m.
Surrey
LAB3 Ahmad Rad
Sep 4 – Dec 3, 2024: Fri, 2:30–5:20 p.m.
Surrey
MSE 251 - Electronic Circuits (4)

Introduces the basic electronic components, amplifiers, diodes, and oscillators. Fundamentals of logic design. Prerequisite: MSE 250 or ENSC 220 or SEE 230. Students with credit for SEE 231, ENSC 225 or ENSC 226 may not take MSE 251 for further credit.

MSE 252 - Fundamentals of Digital Logic and PLCs (3)

Explore digital logic and Programmable Logic Controllers (PLCs). This course bridges theory and practice, covering digital circuits, PLC systems, and hands-on exercises. Engage in laboratory work and projects, applying concepts like Boolean algebra, combinational logic, counters, timers, and more to real-world applications.

MSE 280 - Linear Systems (3)

The objectives of this course are to cover the modelling and analysis of continuous and discrete signals using linear techniques. Topics covered include: a review of Laplace transforms; methods for the basic modelling of physical systems; discrete and continuous convolution; impulse and step response; transfer functions and filtering; the continuous Fourier transform and its relationship to the Laplace transform; frequency response and Bode plots; sampling; the Z-transform. Prerequisite: MSE 250 (or ENSC 220) and (MATH 260 or MATH 310). Students with credit for ENSC 380 or SEE 341 may not take MSE 280 for further credit.

MSE 281 - Modelling of Mechatronic Systems (3)

The theory and application of first, second and higher order linear differential equations. Introduction to system modeling to allow the construction of dynamic models of mechanical and electrical engineering systems. Laplace transforms. Prerequisite: MATH 251, MSE 103, MSE 250. MSE 250 may be taken concurrently.

MSE 310 - Sensors and Actuators (3)

This course provides an introduction to sensors and actuators for electromechanical, computer-controlled machines and devices. Topics include operating principles, design considerations, and applications of analog sensors, digital transducers, stepper motors, continuous-drive actuators, and drive system electronics. Component integration and design considerations are studied through examples selected from various mechatronic applications. Laboratory exercises to strengthen the understanding of the course material are developed and required. Prerequisite: MSE 221, MSE 222, MSE 251, MSE 280. Students with credit for ENSC 387 may not take MSE 310 for further credit.

Section Instructor Day/Time Location
D100 Amr Marzouk
Sep 4 – Dec 3, 2024: Wed, 9:30 a.m.–12:20 p.m.
Surrey
D101 Amr Marzouk
Sep 4 – Dec 3, 2024: Wed, 12:30–1:20 p.m.
Surrey
LAB1 Amr Marzouk
Sep 4 – Dec 3, 2024: Mon, 4:30–7:20 p.m.
Oct 15, 2024: Tue, 4:30–7:20 p.m.
Surrey
Surrey
LAB2 Amr Marzouk
Sep 4 – Oct 11, 2024: Tue, 4:30–7:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 4:30–7:20 p.m.
Surrey
Surrey
LAB3 Amr Marzouk
Sep 4 – Dec 3, 2024: Wed, 4:30–7:20 p.m.
Surrey
MSE 312 - Mechatronics Design II (4) *

Interweaves mechanisms, electronics, sensors, and control strategies with software and information technology to examine the demands and ideas of customers and find the most efficient, cost-effective method to transform their goals into successful commercial products. Most of the term is devoted to a significant design project in which student groups work independently and competitively, applying the design process to a project goal set by the faculty co-ordinator. Prerequisite: MSE 110 (or ENSC 182), MSE 320 (or ENSC 382), MSE 381 (or ENSC 383). MSE 381 may be taken concurrently. Students with credit for ENSC 384 may not take MSE 312 for further credit.

MSE 320 - Machine Design (4)

Review of stress and strain in solids, superposition, energy theorems, theories of failure, elastic and inelastic analysis of symmetrical bending, torsion of circular members, and virtual work. Adequacy assessment and synthesis of machine elements with a focus on the design process. Static failure of ductile and brittle materials, fatigue analysis of structures. Topics include the design of welds, bolted connections, springs and shafts. Solution strategies include both analytical and finite element methods. Prerequisite: MSE 100 or ENSC 104, MSE 220 or ENSC 231, MSE 221 or ENSC 281. MSE 100 may be taken concurrently. Students with credit for ENSC 382 may not take MSE 320 for further credit.

Section Instructor Day/Time Location
D100 Ramtin Rakhsha
Sep 4 – Oct 11, 2024: Tue, 10:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 10:30 a.m.–12:20 p.m.
Sep 4 – Dec 3, 2024: Fri, 10:30–11:20 a.m.
Surrey
Surrey
Surrey
D101 Ramtin Rakhsha
Sep 4 – Dec 3, 2024: Fri, 11:30 a.m.–12:20 p.m.
Surrey
LAB1 Ramtin Rakhsha
Sep 4 – Oct 11, 2024: Tue, 12:30–3:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–3:20 p.m.
Surrey
Surrey
LAB2 Ramtin Rakhsha
Sep 4 – Dec 3, 2024: Fri, 3:30–6:20 p.m.
Surrey
MSE 321 - Engineering Thermodynamics and Heat Transfer (4)

Energy transfer as work and heat, the First Law of thermodynamics. Properties and states of simple substances. Control-mass and control-volume analyses. Entropy, the Second Law of thermodynamics. Carnot cycle. Energy conversion systems; internal combustion engines, power plants and refrigeration cycles. Heat transfer by conduction, convection, and radiation. Formulation and solution of steady and transient problems. Cooling of microelectronics, thermal solutions. Prerequisite: MATH 251 and MSE 223. Students with credit for ENSC 388 may not take this course for further credit.

Section Instructor Day/Time Location
D100 Mohammad Shojayian
Sep 4 – Oct 11, 2024: Tue, 8:30–10:20 a.m.
Oct 16 – Dec 3, 2024: Tue, 8:30–10:20 a.m.
Sep 4 – Dec 3, 2024: Fri, 8:30–9:20 a.m.
Surrey
Surrey
Surrey
D101 Mohammad Shojayian
Sep 4 – Dec 3, 2024: Fri, 9:30–10:20 a.m.
Surrey
LAB1 Mohammad Shojayian
Sep 4 – Dec 3, 2024: Mon, 11:30 a.m.–2:20 p.m.
Oct 15, 2024: Tue, 11:30 a.m.–2:20 p.m.
Surrey
Surrey
LAB2 Mohammad Shojayian
Sep 4 – Dec 3, 2024: Thu, 10:30 a.m.–1:20 p.m.
Surrey
MSE 352 - Digital Logic and Microcontrollers (4)

Introduction to digital systems and number representation. Combinational systems and sequential logic. Counter design and registers. Synchronous sequential design. Microprocessor applications, memory and I/O systems. Microcontrollers: features, architecture and programming model. Introduction to assembly language and microcontroller programming. Addressing modes, assembling and linking programs. Timer/counter programming. ADC, DAC, and sensor interfacing. Prerequisite: CMPT 130 and either MSE 251 or ENSC 226.

Section Instructor Day/Time Location
D100 Mohammad Narimani
Sep 4 – Dec 3, 2024: Mon, 2:30–4:20 p.m.
Oct 15, 2024: Tue, 2:30–4:20 p.m.
Sep 4 – Dec 3, 2024: Wed, 3:30–4:20 p.m.
Surrey
Surrey
Surrey
D101 Mohammad Narimani
Sep 4 – Dec 3, 2024: Wed, 2:30–3:20 p.m.
Surrey
LAB1 Mohammad Narimani
Sep 4 – Dec 3, 2024: Thu, 1:30–4:20 p.m.
Surrey
LAB2 Mohammad Narimani
Sep 4 – Dec 3, 2024: Thu, 4:30–7:20 p.m.
Surrey
MSE 353 - Power Electronics and Electric Machinery (4)

3-phase circuits, power quality, and transformers, Characteristic of power semiconductor devices, Line frequency controlled rectifiers, Buck, boost, and buck-boost dc-dc power converters, Pulse Width Modulation (PWM) techniques, Voltage source inverters and full-bridge topology, Introduction to dc machines, Introduction to stepper motors, Introduction to induction motors, Introduction to synchronous machines. Prerequisite: MSE 251 (previously ENSC 226). Students with credit for SEE 331 may not take MSE 353 for further credit.

MSE 381 - Feedback Control Systems (4) *

This course is an introduction to the analysis, design, and applications of continuous time linear control systems. Topics include transfer function representation of open and closed loop systems, time domain specifications and steady state error, sensitivity analysis, time and frequency response, and stability criteria. It includes a treatment of methods for the analysis of control systems based on the root locus, Bode plots and Nyquist criterion, and their use in the design of PID, and lead-lag compensation. Lab work is included in this course. Prerequisite: MSE 280 (or ENSC 380). Students with credit for ENSC 383 or SEE 342 may not take MSE 381 for further credit.

MSE 402 - Engineering Ethics, Law, and Professional Practice (2)

This course provides an introduction to the engineering profession, professional practice, engineering law and ethics, including the issues of worker and public safety. It also offers opportunities to explore the social implications and environmental impacts of technologies, including sustainability, and to consider engineers' responsibility to society. Prerequisite: 100 units including one of MSE 102, ENSC 100, ENSC 106, or CMPT 106. MSE 102 may be taken concurrently. Students with credit for ENSC 406 or SEE 402 may not take MSE 402 for further credit.

MSE 410 - Capstone Design Technical Project I (3)

Students will combine their technical and mechatronic design knowledge to conceive, and design a product. A comprehensive report is required at the end of the term. Prerequisite: Completion of at least 24 units from the upper division list of MSE curriculum courses and completion of two co-op terms (MSE 293 or MSE 294 and MSE 393 or MSE 394). Must not be taken concurrently with MSE 493 or MSE 494. Students with credit for ENSC 405W or SEE 410W may not take this course for further credit.

MSE 411 - Capstone Design Technical Project II (3)

Students will apply their technical knowledge to develop a prototype system representing a product that was designed earlier in MSE 410. Students will then present it to a panel of engineers, faculty and student members. Prerequisite: MSE 410. Must not be taken concurrently with MSE 493 or MSE 494. Students with credit for ENSC 440 or SEE 411 may not take MSE 411 for further credit.

PHYS 141 - Studio Physics - Optics, Electricity and Magnetism (4)

A general calculus-based introduction to electricity, magnetism and optics taught in an integrated lecture-laboratory environment. Topics include electricity, magnetism, simple circuits, optics and topics from applied physics. Prerequisite: PHYS 120 or PHYS 125 or PHYS 140 or MSE 103, with a minimum grade of C-, or PHYS 101 with a minimum grade of B. Corequisite: MATH 152 or MATH 155. Students with credit for PHYS 126 or 121 or 102 may not take this course for further credit. Quantitative/Breadth-Science.

and one of

BUS 374 - Organization Theory (3)

Organizations, not individuals, are this course's basic unit of analysis. We will seek to answer questions about organizations, such as why they exist, what objectives they pursue, how they function, how they survive and grow, who they interact with, how they interact with each other, how they are evaluated, and how they respond to failure. In answering these questions, the course will introduce students to major theoretical perspectives and issues studied in organizational theory. Prerequisite: 45 units; BUS 272 with a minimum grade of C-.

Section Instructor Day/Time Location
D100 Rajiv Kozhikode
Sep 4 – Dec 3, 2024: Wed, 2:30–5:20 p.m.
Burnaby
BUS 381 - Introduction to Human Resource Management (3)

Subjects include human resource planning, job analysis and design, recruitment, employment equity, selection and placement, performance appraisal, compensation and benefits, training and development, occupational health and safety, and industrial relations. For each subject an overview of current Canadian issues and practices is presented. Prerequisite: BUS 272 with a minimum grade of C-; 45 units.

Section Instructor Day/Time Location
D100 Melissa McCrae
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–2:20 p.m.
Burnaby
Burnaby
E100 Bahareh Assadi
Sep 4 – Oct 11, 2024: Tue, 4:30–7:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 4:30–7:20 p.m.
Burnaby
Burnaby

and one of

ECON 103 - Principles of Microeconomics (4)

The principal elements of theory concerning utility and value, price and costs, factor analysis, productivity, labor organization, competition and monopoly, and the theory of the firm. Quantitative/Breadth-Soc.

Section Instructor Day/Time Location
D100 Douglas Allen
Sep 4 – Dec 3, 2024: Mon, 8:30–9:20 a.m.
Oct 15, 2024: Tue, 8:30–9:20 a.m.
Sep 4 – Dec 3, 2024: Thu, 8:30–10:20 a.m.
Burnaby
Burnaby
Burnaby
D101 Sep 4 – Oct 11, 2024: Tue, 8:30–9:20 a.m.
Oct 16 – Dec 3, 2024: Tue, 8:30–9:20 a.m.
Burnaby
Burnaby
D102 Sep 4 – Dec 3, 2024: Wed, 8:30–9:20 a.m.
Burnaby
D103 Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–12:20 p.m.
Burnaby
Burnaby
D106 Sep 4 – Dec 3, 2024: Mon, 12:30–1:20 p.m.
Oct 15, 2024: Tue, 12:30–1:20 p.m.
Burnaby
Burnaby
D109 Sep 4 – Dec 3, 2024: Wed, 12:30–1:20 p.m.
Burnaby
D110 Sep 4 – Dec 3, 2024: Wed, 1:30–2:20 p.m.
Burnaby
D114 Sep 4 – Oct 11, 2024: Tue, 8:30–9:20 a.m.
Oct 16 – Dec 3, 2024: Tue, 8:30–9:20 a.m.
Burnaby
Burnaby
D200 Marie Rekkas
Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–1:20 p.m.
Sep 4 – Dec 3, 2024: Thu, 11:30 a.m.–12:20 p.m.
Burnaby
Burnaby
Burnaby
D201 Sep 4 – Dec 3, 2024: Thu, 10:30–11:20 a.m.
Burnaby
D202 Sep 4 – Dec 3, 2024: Thu, 9:30–10:20 a.m.
Burnaby
D203 Sep 4 – Dec 3, 2024: Thu, 8:30–9:20 a.m.
Burnaby
D204 Sep 4 – Dec 3, 2024: Wed, 8:30–9:20 a.m.
Burnaby
D205 Sep 4 – Dec 3, 2024: Wed, 9:30–10:20 a.m.
Burnaby
D206 Sep 4 – Dec 3, 2024: Wed, 10:30–11:20 a.m.
Burnaby
D207 Sep 4 – Dec 3, 2024: Wed, 12:30–1:20 p.m.
Burnaby
D208 Sep 4 – Dec 3, 2024: Wed, 11:30 a.m.–12:20 p.m.
Burnaby
D209 Sep 4 – Dec 3, 2024: Thu, 8:30–9:20 a.m.
Burnaby
D210 Sep 4 – Dec 3, 2024: Thu, 9:30–10:20 a.m.
Burnaby
D211 Sep 4 – Dec 3, 2024: Thu, 10:30–11:20 a.m.
Burnaby
D213 Sep 4 – Dec 3, 2024: Wed, 10:30–11:20 a.m.
Burnaby
D900 Yan Yan
Sep 4 – Dec 3, 2024: Wed, Fri, 10:30 a.m.–12:20 p.m.
Surrey
ECON 113 - Introduction to Microeconomics (3)

Focused on basic competencies in microeconomics, this course is suitable for business and other students not intending to specialize in economics. Topics include gains from trade, supply and demand, prices, competition and monopoly, market failures, and government policies. Economic literacy is an important part of the course. Students who have taken ECON 103 first may not then take this course for further credit. Quantitative/Breadth-Soc.

Section Instructor Day/Time Location
D100 Pierre Mouganie
Sep 4 – Dec 3, 2024: Thu, 12:30–2:20 p.m.
Burnaby
D101 Sep 4 – Dec 3, 2024: Mon, 2:30–3:20 p.m.
Oct 15, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D102 Sep 4 – Dec 3, 2024: Mon, 3:30–4:20 p.m.
Oct 15, 2024: Tue, 3:30–4:20 p.m.
Burnaby
Burnaby
D103 Sep 4 – Dec 3, 2024: Wed, 1:30–2:20 p.m.
Burnaby
D104 Sep 4 – Dec 3, 2024: Wed, 2:30–3:20 p.m.
Burnaby
D105 Sep 4 – Dec 3, 2024: Wed, 3:30–4:20 p.m.
Burnaby
D106 Sep 4 – Dec 3, 2024: Mon, 9:30–10:20 a.m.
Oct 15, 2024: Tue, 9:30–10:20 a.m.
Burnaby
Burnaby
D107 Sep 4 – Dec 3, 2024: Mon, 10:30–11:20 a.m.
Oct 15, 2024: Tue, 10:30–11:20 a.m.
Burnaby
Burnaby
D108 Sep 4 – Dec 3, 2024: Mon, 11:30 a.m.–12:20 p.m.
Oct 15, 2024: Tue, 11:30 a.m.–12:20 p.m.
Burnaby
Burnaby
D109 Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–12:20 p.m.
Burnaby
Burnaby
D110 Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m.
Burnaby
Burnaby
D111 Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m.
Burnaby
Burnaby
D112 Sep 4 – Dec 3, 2024: Wed, 9:30–10:20 a.m.
Burnaby
D113 Sep 4 – Dec 3, 2024: Wed, 10:30–11:20 a.m.
Burnaby
D114 Sep 4 – Dec 3, 2024: Wed, 11:30 a.m.–12:20 p.m.
Burnaby

and one of

ECON 105 - Principles of Macroeconomics (4)

The principal elements of theory concerning money and income, distribution, social accounts, public finance, international trade, comparative systems, and development and growth. Quantitative/Breadth-Soc.

Section Instructor Day/Time Location
D100 John Knowles
Sep 4 – Dec 3, 2024: Wed, 1:30–2:20 p.m.
Sep 4 – Dec 3, 2024: Fri, 12:30–2:20 p.m.
Burnaby
Burnaby
D101 Sep 4 – Dec 3, 2024: Fri, 8:30–9:20 a.m.
Burnaby
D102 Sep 4 – Dec 3, 2024: Fri, 9:30–10:20 a.m.
Burnaby
D103 Sep 4 – Dec 3, 2024: Fri, 10:30–11:20 a.m.
Burnaby
D104 Sep 4 – Dec 3, 2024: Fri, 11:30 a.m.–12:20 p.m.
Burnaby
D106 Sep 4 – Dec 3, 2024: Thu, 9:30–10:20 a.m.
Burnaby
D107 Sep 4 – Dec 3, 2024: Thu, 10:30–11:20 a.m.
Burnaby
D108 Sep 4 – Dec 3, 2024: Thu, 11:30 a.m.–12:20 p.m.
Burnaby
D109 Sep 4 – Dec 3, 2024: Wed, 2:30–3:20 p.m.
Burnaby
D200 Vasyl Golovetskyy
Sep 4 – Dec 3, 2024: Wed, 2:30–5:20 p.m.
Burnaby
D201 Sep 4 – Dec 3, 2024: Mon, 12:30–1:20 p.m.
Oct 15, 2024: Tue, 12:30–1:20 p.m.
Burnaby
Burnaby
D202 Sep 4 – Dec 3, 2024: Mon, 1:30–2:20 p.m.
Oct 15, 2024: Tue, 1:30–2:20 p.m.
Burnaby
Burnaby
D203 Sep 4 – Dec 3, 2024: Mon, 2:30–3:20 p.m.
Oct 15, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D204 Sep 4 – Dec 3, 2024: Mon, 3:30–4:20 p.m.
Oct 15, 2024: Tue, 3:30–4:20 p.m.
Burnaby
Burnaby
D207 Sep 4 – Dec 3, 2024: Wed, 10:30–11:20 a.m.
Burnaby
D208 Sep 4 – Dec 3, 2024: Wed, 11:30 a.m.–12:20 p.m.
Burnaby
D209 Sep 4 – Dec 3, 2024: Wed, 12:30–1:20 p.m.
Burnaby
D210 Sep 4 – Dec 3, 2024: Wed, 1:30–2:20 p.m.
Burnaby
D900 Yan Yan
Sep 4 – Dec 3, 2024: Wed, Fri, 2:30–4:20 p.m.
Surrey
ECON 115 - Introduction to Macroeconomics (3)

Focused on basic competencies in macroeconomics, this course is suitable for business and other students not intending to specialize in economics. Topics include GDP, economic growth, business cycles, unemployment, inflation, money, monetary and fiscal policies, exchange rates, government debt, globalization and trade policy. Economic literacy is an important part of the course. Students who have taken ECON 105 first may not then take this course for further credit. Quantitative/Breadth-Soc.

Section Instructor Day/Time Location
D100 Maliha Nazir
Sep 4 – Dec 3, 2024: Mon, 2:30–4:20 p.m.
Oct 15, 2024: Tue, 2:30–4:20 p.m.
Burnaby
Burnaby
D101 Sep 4 – Dec 3, 2024: Fri, 1:30–2:20 p.m.
Burnaby
D102 Sep 4 – Dec 3, 2024: Fri, 2:30–3:20 p.m.
Burnaby
D105 Sep 4 – Dec 3, 2024: Thu, 11:30 a.m.–12:20 p.m.
Burnaby
D106 Sep 4 – Dec 3, 2024: Thu, 12:30–1:20 p.m.
Burnaby
D107 Sep 4 – Dec 3, 2024: Thu, 1:30–2:20 p.m.
Burnaby
D108 Sep 4 – Dec 3, 2024: Thu, 2:30–3:20 p.m.
Burnaby
D109 Sep 4 – Dec 3, 2024: Wed, 1:30–2:20 p.m.
Burnaby
D110 Sep 4 – Dec 3, 2024: Wed, 2:30–3:20 p.m.
Burnaby
D113 Sep 4 – Dec 3, 2024: Wed, 10:30–11:20 a.m.
Burnaby
D114 Sep 4 – Dec 3, 2024: Wed, 11:30 a.m.–12:20 p.m.
Burnaby

and one of

BUS 207 - Managerial Economics (3)

Emphasis is upon the relevance of economic models to business decision-making and, in particular, upon the rational analysis of choice alternatives within the firm. Course will include consideration of optimizing techniques and analysis of risk, demand, production and profit in addition to examination of long-term investment decisions and business forecasting. Prerequisite: ECON 103 or ECON 113, ECON 105 or ECON 115, MATH 157, all with a minimum grade of C-; 15 units. Students with credit for ECON 201 may not take this course for further credit. Quantitative.

Section Instructor Day/Time Location
D100 Karen Ruckman
Sep 4 – Dec 3, 2024: Thu, 2:30–5:20 p.m.
Burnaby
D200 Mohamad Sadri Karami
Sep 4 – Dec 3, 2024: Mon, 2:30–5:20 p.m.
Oct 15, 2024: Tue, 2:30–5:20 p.m.
Surrey
Surrey
E100 Mohamad Sadri Karami
Sep 4 – Dec 3, 2024: Wed, 5:30–8:20 p.m.
Burnaby
ECON 201 - Microeconomic Theory I: Competitive Behavior (4)

Aspects of microeconomic theory involving competitive markets. Topics include the behavior of households and firms, partial equilibrium analysis of product and factor markets, and general equilibrium. Prerequisite: ECON 103 with a minimum grade of C- or ECON 113 with a minimum grade of A-; ECON 105 with a minimum grade of C- or ECON 115 with a minimum grade of A-; MATH 150, MATH 151, MATH 154, or MATH 157, with a minimum grade of C-. Quantitative.

Section Instructor Day/Time Location
D100 Gulriz Barkin
Sep 4 – Dec 3, 2024: Mon, 10:30 a.m.–12:20 p.m.
Oct 15, 2024: Tue, 10:30 a.m.–12:20 p.m.
Sep 4 – Dec 3, 2024: Wed, 10:30–11:20 a.m.
Burnaby
Burnaby
Burnaby
D101 Sep 4 – Dec 3, 2024: Mon, 2:30–3:20 p.m.
Oct 15, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D102 Sep 4 – Dec 3, 2024: Mon, 3:30–4:20 p.m.
Oct 15, 2024: Tue, 3:30–4:20 p.m.
Burnaby
Burnaby
D103 Sep 4 – Oct 11, 2024: Tue, 11:30 a.m.–12:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 11:30 a.m.–12:20 p.m.
Burnaby
Burnaby
D104 Sep 4 – Oct 11, 2024: Tue, 12:30–1:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 12:30–1:20 p.m.
Burnaby
Burnaby
D105 Sep 4 – Oct 11, 2024: Tue, 1:30–2:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 1:30–2:20 p.m.
Burnaby
Burnaby
D106 Sep 4 – Oct 11, 2024: Tue, 2:30–3:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–3:20 p.m.
Burnaby
Burnaby
D107 Sep 4 – Dec 3, 2024: Wed, 8:30–9:20 a.m.
Burnaby
D108 Sep 4 – Dec 3, 2024: Wed, 9:30–10:20 a.m.
Burnaby

Prior approval by the director of the school is required if the student plans a term with fewer than 12 course units.

* Strongly recommended to be completed concurrently.

** To be completed at Simon Fraser University.

† To be completed before the student's 75th unit and at Simon Fraser University in accordance with the WQB requirements.

Agriculture Technology (AgriTech) Concentration

This concentration is for students who wish to specialize in agriculture technology.

Students who choose this concentration will complete all of

BISC 106 - Biological Systems for Engineers (3)

Engineering students are introduced to biological levels of organization and biosystems thinking. Specific lecture and lab topics include: cells and cellular processes, DNA, plant biology, animal biology, pathogens, ecology, and biosystems. Prerequisite: Enrolled in the MSE program. Students who have taken BISC 101 or higher level BISC courses first may not then take this course for further credit.

Section Instructor Day/Time Location
B100 Liz Steves
TBD
LAB1 Elizabeth Steves
Sep 4 – Dec 3, 2024: Fri, 4:30–6:20 p.m.
Surrey
MSE 360 - Introduction to Biosystems Engineering (3)

Introduction to biosystems engineering with relation to agriculture and agricultural engineering. Covers natural resource management including water irrigation, scheduling, conservation and contaminants; soil and soil erosion. Controlled environments for agricultural. Introduction to agricultural machinery. All with a focus on sustainable agricultural practices and understanding the environmental impact assessments of technology and agricultural practices. Prerequisite: CHEM 120.

MSE 460 - Precision AgriTech Engineering (3)

Digital agricultural mapping and technologies. Guidance and path sensing for agriculture including autonomous technologies, drones and AUVs. Sensing technologies including optical, gas, temperatures sensors for aerial and remote sensing of the environment and agricultural products, in natural and controlled settings. Data gathering and management, analysis of sensor data, including the application of variable rate systems. Prerequisite: MSE 310 and MSE 360.

Section Instructor Day/Time Location
D100 Krishna Vijayaraghavan
Sep 4 – Oct 11, 2024: Tue, 2:30–4:20 p.m.
Oct 16 – Dec 3, 2024: Tue, 2:30–4:20 p.m.
Sep 4 – Dec 3, 2024: Thu, 2:30–3:20 p.m.
Surrey
Surrey
Surrey
LAB1 Krishna Vijayaraghavan
Sep 4 – Dec 3, 2024: Wed, 11:30 a.m.–2:20 p.m.
Surrey
MSE 480 - Manufacturing Systems (3)

An introduction to manufacturing systems: industrial robotics, manufacturing system components and definitions, material handling systems, production lines, assembly systems, robotic cell design, cellular manufacturing, flexible manufacturing systems, quality control, manufacturing support systems. Prerequisite: MSE 310 (or ENSC 387)and a minimum of 80 credits. Students with credit for ENSC 432 may not take MSE 480 for further credit.

SEE 351 - Bioprocess Engineering Systems (3)

Combines biotechnology and engineering for materials and energy harvesting for a broad range of industrial and environmental applications. Offers an in-depth understanding of underlying principles of bioprocesses, which leads to design and operation of a variety of innovative biosensors, control systems and full-scale bioreactors. Sustainable engineering applications include food processing and preservation, biofuel production, and energy generation from waste streams. Prerequisite: (MATH 260 or MATH 310), and SEE 224. Corequisite: SEE 324. MSE students who completed MSE 321 can take this course upon approval of the course instructor.

Students also complete two mechatronic systems engineering elective courses selected from a pre-approved MSE electives list instead of four courses.

Business Concentration Elective Courses

Students must complete at least four upper division courses in a business concentration including at least three 400 division BUS courses, each worth a minimum of three units (excluding BUS 478 and practicum courses). 400 division BUS courses worth zero units cannot be used to fulfil this requirement. At least one of these 400 division BUS courses must be completed at Simon Fraser University.

Business Concentration

Students may choose to complete one or more business concentrations by meeting the concentration requirements listed on the business major page of the calendar.

Mechatronic Systems Engineering Elective Courses

Students must also complete four mechatronic systems engineering elective courses selected from a pre-approved MSE electives list that is available at https://www.sfu.ca/mechatronics/current-students/undergraduate-students/undergraduate-program-requirements/technical-studies-electives.html.

With undergraduate curriculum committee chair permission, students may replace one MSE elective with either a directed study or a special project laboratory course. Special topics courses that have been approved by the undergraduate curriculum committee chair and the director may be counted here.

Elective Course Requirements

In addition to the courses listed above, students should consult an academic advisor to plan the remaining required elective courses.

Writing, Quantitative, and Breadth Requirements

Students admitted to Simon Fraser University beginning in the fall 2006 term must meet writing, quantitative and breadth requirements as part of any degree program they may undertake. See Writing, Quantitative, and Breadth Requirements for university-wide information.

WQB Graduation Requirements

A grade of C- or better is required to earn W, Q or B credit

Requirement

Units

Notes
W - Writing

6

Must include at least one upper division course, taken at Simon Fraser University within the student's major subject; two courses (minimum three units each)

Q - Quantitative

6

Q courses may be lower or upper division; two courses (total six units or more)
B - Breadth

18

Designated Breadth

Must be outside the student's major subject, and may be lower or upper division:

Two courses (total six units or more) Social Sciences: B-Soc
Two courses (total six units or more) Humanities: B-Hum
Two courses (total six units or more) Sciences: B-Sci

6

Additional Breadth

Two courses (total six units or more) outside the student's major subject (may or may not be B-designated courses, and will likely help fulfil individual degree program requirements).

Students choosing to complete a joint major, joint honours, double major, two extended minors, an extended minor and a minor, or two minors may satisfy the breadth requirements (designated or not designated) with courses completed in either one or both program areas.

Residency Requirements

For students in this double degree program, the general university requirements are modified by reduction of the Humanities (B-Hum) breadth requirement from six units to three units. The B-Hum should be taken during one of the optional co-op terms.

The University’s residency requirement stipulates that, in most cases, total transfer and course challenge credit may not exceed 60 units, and may not include more than 15 units as upper division work.

At least half of the program’s total units must be earned through Simon Fraser University study.

At least two thirds of the program’s total upper division units must be earned through Simon Fraser University study.

At least two thirds of the upper division units in the courses of a school offering (or joint offering) a program must be earned through that school at Simon Fraser University.