SFU Additive Manufacturing Laboratory

IEEE International Flexible Electronics Technology Conference  (IEEE IFETC 2019)

is going to be held in Vancouver on August 11th to 14th, 2019 at SFU Harbour Centre.

SFU AML will support the conference.      http://attend.ieee.org/ifetc-2019

 

Biography

          

Dr. Woo Soo Kim joined Simon Fraser University (SFU), located in British Columbia Canada, in September 2010 as a tenure-track Assistant Professor and promoted to Associate Professor in 2016. He was selected in 2017 as a Brain Pool Fellow for his sabbatical leave at Seoul National University in Korea and stayed at Swiss Federal Laboratories of Materials Science and Testing, Empa in ETH Domain as a visiting professor in 2018. Prior to joining SFU, he was a Senior Research Scientist in Xerox Corporation (XRCC) for two years after the period of a Post-doctoral Research Associate in Massachusetts Institute of Technology (MIT) for two and half years. He received BSc degree from Yonsei University in 2001 and MSc and PhD degrees from Korea Advanced Institute of Science and Technology (KAIST) in the Department of Material Engineering. He was the winner of Quadrant Award 2007, international PhD thesis competition. And he received Hanwha Corporation’s New Faculty Award in 2016. His research interest is broad in the field of Additive Manufacturing for energy and sensing applications.


  Woo Soo Kim, PhD, PEng

  School of Mechatronic Systems Engineering, 

  Simon Fraser University   

  T) +1 (778) 782 8635, 

  Email: woosook@sfu.ca

  http://www.sfu.ca/~woosook  

  Google scholar citation

SFU AML’s Media Highlights


  1. 1. News on 3D printed sustainable solutions in 2019:

    ScienceDaily;   AAAS EurekAlert!;   3D Printing Media Network;   3D Printing Industry;

    3ders;    Interesting Engineering;    Materials Post;     eeNews;    T. Evo;    Evertiq;

    Semiconductor Engineering;    The Fifth Estate;    3Druck;    Innovazione;

    PowerPulse.net;   3D Natives;         

  

  1. 2. Interview with New Scientist about “The future of 3D Printing in Wearables Industry”


  1. 3. Hanwha Corporation’s Advanced Material New Faculty Award 2016


  1. 4. IEEE EDL Publication led by Undergrad Co-op Student


  1. 5. Interview with Macleans about “100 Discoveries That Will Change The World”

 

  1. 6. Quadrant Award 2007

  

Principal Investigator

The SFU Additive Manufacturing Laboratory is the research group of Professor Woo Soo Kim, a faculty member of the Mechatronic Systems Engineering at Simon Fraser University.

This research group is focused on the Additive Design Engineering & Technology Development for Additive Manufacturing, and 3D integration to investigate state-of-art engineering challenges for Robotics, Health, and Internet-of-Things sensing applications with a wide range of research projects.




SFU Additive Manufacturing Laboratory

3D printed cellulose sensor research selected as Journal front cover:

Adv. Elec. Mater. (2019)