SFU Owner's Technical Requirements

Technical Requirements for Prime Consultants, Architects, Consulting Engineers and Construction Professionals

The SFU Owner’s Technical  Requirements (OTR) are documented principles of designs and construction for working at SFU Burnaby Campus and provides a set of requirements organized in Master Format for Construction Professionals. The technical requirements are not intended to be prescriptive or hinder design creativity, but serves as a starting point to expedite SFU project delivery. The OTR is also not a design manual but does outline SFU's performance objectives, recommended practices that have worked at SFU, sample front end documents plus steps to follow to navigate through a project at SFU.

The service provider working with the OTR is expected to complete the following during the design process:

·         Download and read through the document pertaining to your approach

·         Follow the OTR as provided or create alternative design approach

·         Provide and communicate an exception report broken down by sections on any alternative designs, substitutions and/or  technical advancement or obsolescence.  

Disclaimer

The SFU OTR is not a substitute for professional services commissioned by the University. Compliance to best practices, professional liability, standard of care, latest Standards, Acts, Bylaws and Building and Energy Codes shall prevail and supersede the OTR. The consultant must bring these conflicts in writing to the attention of the Project Manager, SFU Facilities Services as a variance request to the OTR.

For general inquiries, please contact the Facilities Services Service Desk at fm_service_desk@sfu.ca or (778)-782-3582.

Click here to download the complete SFU Owner's Technical Requirements document (PDF).  

Specification Division Documents

• Division 00 Procurement and Contracting Requirements
• Division 01 General Requirements
• Division 02 Existing Conditions
• Division 03 Concrete
• Division 04 Masonry
• Division 05 Metals
• Division 06 Wood, Plastics, and Composites
• Division 07 Thermal and Moisture Protection
• Division 08 Openings
• Division 09 Finishes
• Division 10 Specialties
• Division 11 Equipment
• Division 12 Furnishings
• Division 14 Conveying Equipment
• Division 20 Mechanical - General Requirements
• Division 21 Fire Suppression
• Division 22 Plumbing
• Division 23 Heating, Ventilating, and Air Conditioning (HVAC)
• Division 25 Building Management Systems
• Division 26 Electrical
• Division 27 Communications
• Division 27A Audiovisual
• Division 28 Electronic Safety and Security
• Division 31 Earthwork
• Division 32 Exterior Improvements
• Division 33 Utilities